User Guide

Crestron
MT-500C
MiniTouch Color RF Wireless Handheld
Plug in Options for Serial Cable
To load a VT Pro-e project:
1. Open Viewport.
2. Establish communications between the MT-500C and the PC using
Viewport (refer to page 11).
3. Select File Transfer | Send Touchpanel (MT-500c only). An “Open”
window appears (refer to graphic below).
“Open” Window
4. Locate file to transfer (for example, interface1.hex) and click Open. The
file uploads to the MT-500C.
NOTE: The display does not show the status of the upload.
NOTE: The MT-500C reboots (displays an animation sequence) and the Viewport
command prompt displays ‘freshly loaded’ to indicate that the file was successfully
transferred.
NOTE: If you cancel the transfer before it is complete, the following message may
appear on the MT-500C display:
Configuration File
Corrupted
If this occurs, reload the project.
Operations Guide – DOC. 6101 MiniTouch Color RF Wireless Handheld • 17