User Guide

Software Crestron Serial Mouse Control Driver
PORT CONNECTOR to CONNECTOR DEVICE PORT
A
1
VGA DB-15, male DB-15, male Touchpanel RGB
B
2
COM DB-9, female RJ-11, 6-pin Touchpanel RS-232
C
3
NET 4-wire Cresnet 4-wire Cresnet TPS-IMC NET
D
4
NET/VIDEO RJ-45, 10-pin RJ-45, 10-pin Touchpanel NET/VIDEO
1
2
3
4
SERIAL COMMUNICATION #1 - TILT TOUCHPANEL WITH TPS-XVGA CARD
REF
FROM TOCABLING REQUIRED
DEVICE
PC
PC
Control System
During serial communications, the control system and Cresnet wiring are required for touchpanel basic functionality
and operating power. For Cresnet 4-wire specifications, refer to Appendix 3 on page 25 of this guide.
A 15-foot NET/VIDEO cable is supplied with the TPS-IMC. For further information about Crestron NET/VIDEO
cables, refer to Appendix 3 on page 25 of this guide.
This connection can be made via a modular RJ11 cable (supplied with touchpanel) and DB9F to RJ11 adapter. For
cabling specifications, refer to Appendix 3 on page 25 of this guide.
Standard stranded VGA monitor cable.
TPS-IMC
Serial Communication #2 - Tilt Touchpanel with TPS-XVGA-BV
RGB CABLE
PC
TILT TOUCHPANEL
WITH TPS-XVGA-BV
RGB
PORT
RGB
PORT
TPS-IMC-BV
AUDIOVIDEO
NET/
TO PANEL
RGB
BAL
INPUT
AUDIO
INPUT
AUDIO
+
R
S +- -
L
S
COAX
MIC OUT
-+ S
NTSC/PAL V IDEO
NET
Z G
24VDC
Y242.0A
VIDEO
BALANCED
RGB Y
COMP
C
CRESTRON
TPS-IMC-BV
RS-232
PORT
COM
PORT
COMM. CABLE
VGA
PORT
A
B
C
NET (OR
CRESNET)
PORT
CRESNET
WIRING
NET PORT
NET/VIDEO
PORT
E
TO NET/
VIDEO
PORT
D
CONTROL SYSTEM
RGB
PORT
BKLT
MENU
PROFESS IONA L CONTROL PROCESSOR
PRO
2
CRESTRON
PORT CONNECTOR to CONNECTOR DEVICE PORT
A
1
VGA DB-15, male DB-15, male TPS-IMC-BV RGB
B
2
RGB RJ-45, 10-pin RJ-45, 10-pin Touchpanel RGB
C
3
COM DB-9, female RJ-11, 6-pin Touchpanel RS-232
D
4
NET 4-wire Cresnet 4-wire Cresnet TPS-IMC-BV NET
E
2
NET/VIDEO RJ-45, 10-pin RJ-45, 10-pin Touchpanel NET/VIDEO
1
2
3
4
TPS-IMC-BV
These connections (ref B & E) can be made with the 15-foot Triamese cable supplied with the TPS-IMC-BV. For
further information about the Triamese cable and other cabling options, refer to Appendix 3 on page 25 of this guide.
This connection can be made via a modular RJ11 cable (supplied with touchpanel) and DB9F to RJ11 adapter. For
cabling specifications, refer to Appendix 3 on page 25 of this guide.
REF
SERIAL COMMUNICATION #2 - TILT TOUCHPANEL WITH TPS-XVGA-BV CARD
FROM CABLING REQUIRED TO
DEVICE
PC
TPS-IMC-BV
PC
Control System
During serial communications, the control system and Cresnet wiring are required for touchpanel basic functionality
and operating power. For Cresnet 4-wire specifications, refer to Appendix 3 on page 25 of this guide.
Standard stranded VGA monitor cable.
6 • Serial Mouse Control Driver Programmer’s Guide - DOC. 5916A