Specifications

PROCISE™ Surround Sound Processor Crestron PSPHD
Connectors, Controls & Indicators (Continued)
# CONNECTORS*,
CONTROLS &
INDICATORS
DESCRIPTION
9
DISPLAY BUTTON
(1) pushbutton, normally sets the front panel
display brightness; pressing DISPLAY and
HOME simultaneously for 5 seconds enters
the Installer menu
10
MICROPHONE,
RESET BUTTON, and
USB PORT
(behind removable front
panel)
(1) 3-pin mini-XLR Jack:
Input for calibrated microphone (part of
CSSTK Surround Sound Tuning Kit, sold
separately)
RESET BUTTON:
Press this button to initiate a system hardware
reset. This has the same effect as
disconnecting and reconnecting power.
NOTE: Be sure that a connected amplifier is
turned off before pressing RESET.
(1) USB Type B female:
USB 1.1 computer console port (cable
included)
PIN DESCRIPTION
1 +5 VDC
2 Data -
3 Data +
4 Ground
NOTE: To prevent damage to the PSPHD’s
finish, use a flat-edge tool made of plastic or
covered in tape when removing the front panel
11 DISPLAY (RIGHT)
The right side of the PSPHD contains a
Vacuum Fluorescent Display (VFD) that can
show the volume level, the VU meter, the
spectrum analyzer, and the level settings.
12
METER BUTTON (1) pushbutton, enables dual VU meter
display
13
SPECTRUM BUTTON
(1) pushbutton, enables dual spectrum
analyzer display
14
LEVEL BUTTON (1) pushbutton, enables display of speaker
compensation levels
(Continued on following page)
20 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B