Specifications

PROCISE™ Surround Sound Processor Crestron PSPHD
Setup
Network Wiring
When wiring the Cresnet
®
and Ethernet network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or damage
to the equipment. Please use the Crestron Power Calculator to help calculate
how much power is needed for the system (
www.crestron.com/calculators).
Cresnet
For networks with 20 or more devices, use a Cresnet Hub/Repeater (CNXHUB) to
maintain signal quality.
For more details, refer to “Check Network Wiring” on page 61.
Ethernet
The PSPHD can also use high-speed Ethernet for communications between the
device and a control system, computer, digital media server and other IP-based
devices.
For information on connecting Ethernet devices in a Crestron system, refer to the
latest version of the Crestron e-Control
®
Reference Guide (Doc. 6052), which is
available from the Crestron website (
www.crestron.com/manuals).
Identity Code
Net ID
The Net ID of the PSPHD has been factory set to 9C. The Net IDs of multiple
PSPHD devices in the same system must be unique. Net IDs are changed from the
Installer menu or from a personal computer (PC) via Crestron Toolbox™. For
information on setting the Net ID with the Installer menu, refer to “Cresnet ID”
which starts on page 43. For information on setting the Net ID with Crestron
Toolbox, refer to “Establishing Communication” on page 50.
When setting the Net ID, consider the following:
• The Net ID of each unit must match an ID code specified in the SIMPL™
Windows program.
• Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
IP ID
The IP ID is set from the Installer menu or within the PSPHD’s IP table using
Crestron Toolbox. For information on setting the IP ID with the Installer menu, refer
to “IP ID” on page 44. For information on setting the IP ID in an IP table, refer to the
Crestron Toolbox help file. The IP IDs of multiple PSPHD devices in the same
system must be unique.
When setting the IP ID, consider the following:
• The IP ID of each unit must match an IP ID specified in the SIMPL™
Windows program.
• Each device using IP to communicate with a control system must have a
unique IP ID.
24 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B