Specifications

Crestron PSPHD PROCISE™ Surround Sound Processor
NOTE: A USB port is concealed behind the label cover on the front panel. The USB
port is used to connect with a PC and provides a console connection to the PSPHD.
A microphone jack is also concealed behind the front panel’s label cover. This jack
is used to connect the microphone that is included with the available Crestron
Professional Surround Sound Tuning Kit. For more information, refer to the latest
version of the Crestron Professional Surround Sound Tuning Kit Operations Guide
(Doc. 6565) which is available from the Crestron website.
NOTE: To prevent damage to the PSPHD’s finish, use a flat-edge tool made of
plastic or covered in tape when removing the front panel
Hardware Hookup for the PSPHD
OUTPUT:
To Crestron PROCISE Amplifier
Or Other Audio Amplifier
DIGITAL SOURCES:
From Digital Audio Sources Via
TOSLINK Optical or Coax
AES/EBU:
From AES Digital Audio
Source
ANALOG SOURCES:
From Analog Audio
Sources
HDMI INPUTS:
From HDMI
Sources
MULTI-CHANNEL SOURCE:
Line-level Input From
Surround Sound Source
DOWNMIX OUT:
To Other Balanced Or Unbalanced
Line-level Equipment
POWER:
From Line Voltage
GROUND:
Tie All Sources To
PSPHD Ground
HMDI OUTPUT:
To HDMI Display
LAN:
10/100 Base-T
Ethernet to LAN
NET:
To Cresnet Devices
BALANCED STEREO:
From Balanced Stereo
Source
MIXER INPUT:
From Balanced Or
Unbalanced Line-level
Sources
NOTE: Ensure the unit is properly grounded by connecting the chassis ground lug
to an earth ground (building steel).
NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.
HDMI Connections
Refer to the following diagram to properly connect devices using an HDMI cable.
Installing and HDMI Cable
Operations Guide – DOC. 6837B PROCISE™ Surround Sound Processor: PSPHD • 27