Specifications

Crestron PSPHD PROCISE™ Surround Sound Processor
Restore Default Settings
The PSPHD’s audio settings can be restored to their default settings.
NOTE: Audio settings set from the front panel and the PROCISE Tools utility are
restored to their default settings.
To restore the default settings:
1. Open the Audio Setup section as described on page 31.
2. Turn the selection knob until Restore Defaults Including Presets is
displayed and press the selection knob.
3. To confirm the selection, turn the selection knob to highlight Yes and press
the selection knob. To cancel, turn the selection knob to highlight No (or
press HOME) and press the selection knob.
Back
At any point in the Audio Setup section, you can return to the Installer menu:
1. Turn the selection knob until Back is displayed.
2. Press the selection knob to return to the Installer menu.
Network Setup
Use the Network Setup section of the Installer menu to define the PSPHD’s network
configuration. IP address, Subnet Mask, Default Router, DHCP mode, WINS server,
hostname, domain, and MAC address can be adjusted or displayed from the Network
Setup menu.
Open Network Setup
To open the Network Setup section of the Installer menu:
1. Open the Installer menu as described on page 30.
2. Turn the selection knob until Network Setup is displayed and press the
selection knob.
Network Setup
NETWORK SETUP
Pair Crestron Amplifier
SOURCE MODE SETUP INFO
Operations Guide – DOC. 6837B PROCISE™ Surround Sound Processor: PSPHD • 35