Specifications

Crestron PSPHD PROCISE™ Surround Sound Processor
2. Turn the selection knob until the PSPHD’s IP address is displayed. Press
the selection knob to open the IP Address control. The first octet of the IP
address will be enclosed in brackets.
IP Address Control
NETWORK SETUP
IP Address
[172] 032. 159. 122
SOURCE MODE SETUP INFO
3. Turn the selection knob to display the desired number.
4. Press the selection knob to move the cursor to the next octet.
5. Repeat steps 3 and 4 until the desired IP address is displayed. The IP
address will be entered after the last octet has been set.
For information on configuring the PSPHD to use a DHCP server to obtain an IP
address, refer to “DHCP” on page 40.
Subnet Mask
The PSPHD’s subnet mask can be displayed and changed. To display and change the
subnet mask:
1. Open the Network Setup section as described on page 35.
2. Turn the selection knob until the subnet mask’s IP address is displayed. To
change the address, press the selection knob to open the Subnet Mask
control. The first octet of the subnet mask’s IP address will be enclosed in
brackets.
Subnet Mask Control
NETWORK SETUP
Subnet Mask
[255] 255. 240. 000
SOURCE MODE SETUP INFO
3. Turn the selection knob to display the desired number.
4. Press the selection knob to move the cursor to the next octet.
5. Repeat steps 3 and 4 until the desired IP address is displayed. The IP
address will be entered after the last octet has been set.
Default Router
The PSPHD’s default router can be displayed and changed. To display and change
the default router:
1. Open the Network Setup section as described on page 35.
Operations Guide – DOC. 6837B PROCISE™ Surround Sound Processor: PSPHD • 39