Specifications

PROCISE™ Surround Sound Processor Crestron PSPHD
3. Press the selection knob to display the Audyssey Dynamic EQ control.
Audyssey Dynamic EQ Control
SETUP
AUDYSSEY Dynamic EQ
On
SOURCE MODE SETUP INFO
Off
4. Turn the selection knob to highlight the desired setting.
5. Press the selection knob to confirm the selection.
6. Press HOME to return to the home display.
Audyssey MultEQ
®
Audyssey MultEQ can be applied to the incoming signal.
NOTE: The Audyssey MultEQ function cannot be enabled unless a valid
calibration has been performed with PROCISE Tools.
NOTE: Until Audyssey calibration has been performed, the PSPHD front panel will
show a message every few seconds indicating that the system should be calibrated.
To enable Audyssey MultEQ:
1. Press the SETUP button to display the first Setup option.
2. Turn the selection knob to display Audyssey MultEQ.
Audyssey MultEQ Setting
SETUP
AUDYSSEY MultEQ is Off
SOURCE MODE SETUP INFO
56 • PROCISE™ Surround Sound Processor: PSPHD Operations Guide – DOC. 6837B