Specifications

1
quickstart guide
PSPHD
www.crestron.com
888.273.7876 201.767.3400
©2010 Specifications subject to
change without notice.
PSPHD
For details, refer to the latest revision of the
PSPHD Operations Guide, Doc. 6837.
QUICKSTART DOC. 6911B (2027570, Sheet 1 of 2) 07.10
PROCISE
™
High Definition Professional Surround Sound Processor
All brand names, product names, and trademarks
are the property of their respective owners.
1
Installation
The following items are not supplied and are needed to complete the
installation:
• Crestron Professional Surround Sound Tuning Kit (CSSTK)
• CAT5/5E cable for Ethernet connections
OR
Cresnet
®
cable for network connection of Crestron devices
• Grounding wire (16 - 12 AWG) for grounding audio
equipment together and connection to earth ground
• Appropriate hand tools (wire cutters, screwdrivers, etc.)
2
Connections
Make connections appropriate to your planned configuration as
called out in the illustration to the right. Refer to “Network Wiring”
in the latest version of the PSPHD Operations Guide
(Doc. 6837) which can be obtained from the Crestron website
(www.crestron.com/manuals) before attaching the 4-position
terminal block connector.
• Apply power only after all other connections have been made.
• Connect theater AV sources and display to the appropriate
balanced or unbalanced connectors.
• Connect the outputs to a PROCISE amplifier.
!
CAUTION: Do not connect power cords until instructed to do so.
Installation consists of placing the PROCISE
™
PSPHD in
position, either mounted in a rack or stacked with other
system components, and connecting the various input, output,
and control interface cables.
The PROCISE PSPHD is supplied with the following:
• One power cable
• One 6’ USB cable
• Three 3-pin terminal block connectors
• Two 4-pin terminal block connectors
• Two “ears” for rack mounting
NOTE: A USB port is concealed behind the removable front panel.
The USB port is used to connect with a PC, and provides a console
connection to the PSPHD. A microphone jack is also concealed
behind the front panel. This jack is used to connect the microphone
that is included with the available Crestron Professional Surround
Sound Tuning Kit. For more information, refer to the latest version
of the Crestron Professional Surround Sound Tuning Kit Operations
Guide (Doc. 6565).
MULTICHANNEL SOURCE:
Line-level Input From Surround
Sound Source
OUTPUT:
To Crestron PROCISE Amplifier or
Other Audio Amplifier
HDMI OUTPUT:
To HDMI
Display
LAN:
10/100 Base-T
Ethernet To LAN
BALANCED STEREO:
From Balanced
Stereo Sources
NET:
To Cresnet
Devices
HDMI INPUTS:
From HDMI
Sources
ANALOG SOURCES:
From Analog
Audio Sources
AES/EBU:
From AES
Digital Audio Source
DIGITAL SOURCES:
From Digital Audio Sources via
Toslink Optical or Coax
DOWNMIX OUT:
To Other Balanced or Unbalanced
Line-Level Equipment
MIXER INPUT:
From Balanced or
Unbalanced
Line-Level Sources
GROUND:
Tie All Sources to
PSPHD Ground
To prevent damage to the PSPHD’s finish, use a
flat-edge tool made of plastic or covered in tape
inserted in the slot (one at either end) to carefully pry up
the end of the removable front panel. Remove the front
panel to expose the USB port and microphone jack.
Microphone
Jack
USB
Port
Front Panel
Slot
POWER:
From Line
Voltage