Crestron PSPHD ® PROCISE 7.
Important Safety Instructions • • • • • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Regulatory Compliance As of the date of manufacture, the PSPHD has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Contents PROCISE 7.3 High Definition Professional Surround Sound Processor: PSPHD 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Features and Functions ......................................................................................
PROCISE 7.3 Surround Sound Processor Crestron PSPHD Future Updates .......................................................................................................... 60 Appendix: Audyssey Laboratories, Inc.................................................................................... 61 Return and Warranty Policies .................................................................................................. 62 Merchandise Returns / Repair Service .........................................
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PROCISE 7.3 High Definition Professional Surround Sound Processor: PSPHD Introduction The PROCISE® PSPHD from Crestron® brings world-class cinema audio to any room, be it a custom home theater, luxury living room, high-tech auditorium or executive boardroom.
PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Applications The following diagrams show 3-D and 2-D views of a PSPHD in residential and commercial applications. PSPHD in a Residential Home Theater Application Operations Guide – DOC. 6837C PROCISE 7.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PSPHD in a Conferencing Boardroom with Audio and Video Conferencing Operations Guide – DOC. 6837C PROCISE 7.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PSPHD in a Boardroom without Conferencing Operations Guide – DOC. 6837C PROCISE 7.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PSPHD in an Auditorium Operations Guide – DOC. 6837C PROCISE 7.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Internal Block Diagram The following diagram represents the abilities of the PSPHD. Internal Block Diagram of the PSPHD 1 2 3 4 5 6 7 8 9 10 1 6 1 4 1 Stereo Audio Stereo Audio Stereo Audio Stereo Audio Stereo Audio 10 x 1 Analog Audio Switch Stereo Audio 7.3 Program Audio Stereo Audio A/D 7.3 Mixed Tone Control Volume Control Main Out 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Specifications Specifications for the PSPHD are listed in the following table. PSPHD Specifications SPECIFICATION DETAILS Audio – General Features 27 selectable source inputs plus built-in ® noise generator, 7.1 Dolby Digital/DTS surround sound decoder, 7.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PSPHD Specifications (Continued) SPECIFICATION DETAILS Audio – Surround Sound (continued) DTS Neo:6 Music Settings CGain 0.0 to 1.0, Standard or Wide mode Dolby Pro Logic IIx Music Settings Dimension ±7, Center Width 0 to 7, Standard or Panorama Audio – Downmix L/R Output Level -80 dB to +20 dB, adjustable from 0% to 100%, plus mute Mono Output Level -80 dB to +20 dB, adjustable from 0% to 100%, plus mute Bass Control ±12.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PSPHD Specifications (Continued) SPECIFICATION DETAILS Audio – Master Mixer Program Level -80.0 to 0.0 dB plus mute per output group (Main, Stereo Downmix, Mono Downmix) Mixer Level -80.0 to 0.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Physical Description This section provides information on the connections, controls and indicators available on the PSPHD. PSPHD Physical View (Front) PSPHD Physical View (Rear) Operations Guide – DOC. 6837C PROCISE 7.
PROCISE 7.3 Surround Sound Processor Crestron PSPHD PSPHD Overall Dimensions (Top View) 17.08 in (434 mm) 17.28 in (439 mm) 13.89 in (353 mm) 14.75 in (375 mm) 18 • PROCISE 7.3 Surround Sound Processor: PSPHD Operations Guide – DOC.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PSPHD Overall Dimensions (Front and Rear View) 1 2 3 8 9 11 16 5.19 in (132 mm) 5.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Connectors, Controls & Indicators (Continued) # CONNECTORS*, CONTROLS & INDICATORS 17 MUTE (Button and LED) 18 DIGITAL SOURCES DESCRIPTION (1) push button and red LED, mutes all outputs (4) JIS F05 female (TOSLINK) optical fiber connectors; S/PDIF optical digital audio inputs (6) RCA female; S/PDIF coaxial digital audio inputs; Input impedance: 75 ohms; Input level: 0.5 Vrms nominal 19 OUTPUT LEFT, RIGHT, SURR L., SURR R., SURR BL., SURR BR.
Crestron PSPHD PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Connectors, Controls & Indicators (Continued) * Operations Guide – DOC. 6837C # CONNECTORS*, CONTROLS & INDICATORS 30 100-240V ~50-60Hz 65W 31 GROUND DESCRIPTION (1) IEC Male C14 male chassis plug; Mates with removable power cord (included) (1) 6-32 screw, chassis ground lug Interface connectors for the NET and MIXER INPUT ports are provided with the unit. PROCISE 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Setup Network Wiring When wiring the Cresnet® or Ethernet network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (www.crestron.com/calculators).
Crestron PSPHD PROCISE 7.3 Surround Sound Processor • If an IP ID is set, Cresnet communications with the PSPHD are disabled. Installation Ventilation The PSPHD should be used in a well-ventilated area. The venting holes should not be obstructed under any circumstances. To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications.
PROCISE 7.3 Surround Sound Processor Crestron PSPHD Ear Attachment for Rack Mounting 4. Stacking Repeat procedure (steps 1 through 3) to attach the remaining ear to the opposite side. Four “feet” are integrated into the PSPHD so that if the unit is not rack mounted, the feet can provide stability when the unit is placed on a flat surface or stacked. NOTE: No more than two PSPHD units should be stacked.
Crestron PSPHD PROCISE 7.
PROCISE 7.3 Surround Sound Processor PROCISE Amplifier Connections Crestron PSPHD Refer to the following diagram to properly connect the PSPHD to a PROCISE amplifier. Connect PSPHD to PROCISE Amplifier NOTE: For optimum performance when connecting to a PROCISE amplifier, Crestron recommends the optional CBL-PRO-XLR-2 (two-foot cable length) or CBL-PRO-XLR-6 (six-foot cable length) cable kit to connect to the PSPHD or other preamplifier. 28 • PROCISE 7.
Crestron PSPHD Mixer Input Connections PROCISE 7.3 Surround Sound Processor Three balanced/unbalanced mixer inputs are provided, utilizing 3-pin terminal block connectors. For connection details, refer to the following table and diagrams.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Configuration After making all hardware connections to the PSPHD, the PSPHD must be configured for operation. Basic configuration is performed with the “INSTALLER MENU”. Advanced audio configuration options such as delay, levels, and equalization are performed with Crestron Toolbox’ PROCISE Tools utility. Information on using the “INSTALLER MENU” begins below. For information on the PROCISE Tools utility, refer to the PROCISE Tools help file.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Audio Setup Use the “AUDIO SETUP” menu to define the room’s speaker configuration. Main speaker arrangement, center-channel speakers, subwoofers, and speaker impedance can be defined in the “AUDIO SETUP” menu. Open the “AUDIO SETUP” Menu To open the “AUDIO SETUP” menu: 1. Open the “INSTALLER MENU” as described on page 30. 2. Turn the selection knob until Audio Setup is displayed and press the selection knob. The “AUDIO SETUP” menu is displayed.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor The following speaker arrangements are available: • Left, Right (L,R): Audio separated into left and right channels. LEFT SCREEN RIGHT CENTER SUBS SEATING • Left, Right, Surround Left, Surround Right (L,R,SL,SR): Audio separated into 4-channel surround sound. For use in a 5.x surround setup.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor • Left, Right, Surround Left, Surround Right, Back Left, Back Right (L,R,SL,SR,SBL,SBR): Audio separated into 6-channel surround sound. For use in a 7.x surround setup. LEFT SURRND LEFT SCREEN RIGHT CENTER SUBS SEATING SURRND RIGHT SURRND BACK LEFT Center Channel SURRND BACK RIGHT The PSPHD can be configured to use a center channel speaker. To configure the PSPHD to use a center channel speaker: 1.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Subwoofer Screen AUDIO SETUP Dual Mono SOURCE 3. MODE SETUP INFO Turn the selection knob to highlight the desired setting and press the selection knob to enable the setting. The following subwoofer arrangements are available: Speaker Impedance • None: No subwoofer is present in the room. • Single: The system uses a single subwoofer. • Dual Mono: The system uses two mono subwoofers. • Dual Stereo: The system uses two stereo subwoofers.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor To restore the default settings: 1. Open the “AUDIO SETUP” menu as described on page 31. 2. Turn the selection knob until Restore Defaults Including Presets is displayed and press the selection knob. To confirm the selection, turn the selection knob to highlight Yes and press the selection knob. To cancel, turn the selection knob to highlight No (or press HOME) and press the selection knob Back To return to the “INSTALLER MENU”: 1.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Pair Crestron Amplifier NOTE: Pairing is for use with Crestron PROAMP amplifiers only. The PSPHD can be paired with a Crestron PROAMP amplifier for control and monitoring of the amplifier.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor “AMPLIFIER PAIRING” Screen AMPLIFIER PAIRING Crestron Amplifier Connection Network SOURCE 6. MODE Direct SETUP INFO Turn the selection knob to highlight Network and press the selection knob. NOTE: The PSPHD and the PROAMP amplifier must be set to the same connection type. NOTE: When using the “Network” connection type, the PSPHD and the PROAMP amplifier must be on the same subnet. 7.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor PSPHD Paired Directly with a PROAMP Amplifier The “Direct” connection can be used for a quick installation test without networking or LAN setup. The LAN port of the PSPHD connects directly to the LAN port of a PROAMP amplifier. At final installation, the pairing process must be executed again when the PSPHD and PROAMP amplifier are installed on a network.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor 7. • The PSPHD automatically reboots. After the PSPHD reboots, the PSPHD and the PROAMP amplifier are paired. Unpairing: To unpair the PSPHD from a PROAMP amplifier, perform the following: IP Address 1. On the PSPHD, open the “NETWORK SETUP” menu as described on page 35. 2. Turn the selection knob until Pair Crestron Amplifier is displayed, and press the selection knob to display the “AMPLIFIER PAIRING” screen. 3.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor “Subnet Mask” Screen NETWORK SETUP [255] SOURCE Default Router Subnet Mask 255. 240. MODE SETUP 000 INFO 3. Turn the selection knob to display the desired number. 4. Press the selection knob to move the cursor to the next octet. 5. Repeat steps 3 and 4 until the desired IP address is displayed. The subnet mask is entered after the last octet has been set. The PSPHD’s default router can be displayed and changed.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor “DHCP” Screen NETWORK SETUP DHCP On SOURCE 3. WINS Off MODE SETUP INFO Turn the selection knob to highlight the desired setting and press the selection knob to enable the setting and return to the “NETWORK SETUP” menu. The PSPHD can be configured to use a WINS server for communication. The default setting for the WINS mode is On. To set the WINS mode: 1. Open the “NETWORK SETUP” menu as described on page 35. 2.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Hostname Screen NETWORK SETUP PSPHD1_ Del Ins SOURCE MODE < SETUP > INFO 3. Select letters (upper and lower-case), numbers, or other characters by turning the selection knob until the desired letter, number, or other character is displayed on the VFD. Valid hostname characters are ASCII letters “a” through “z” (case-insensitive), the digits “0” through “9”, and the hyphen. Hostname cannot begin or end with a hyphen.
Crestron PSPHD MAC Address Back PROCISE 7.3 Surround Sound Processor 4. Move the cursor to another position by pressing the buttons labeled < and >. To delete a character, press the button labeled Del. To insert a space, press the button labeled Ins. 5. After the new name has been entered, press the selection knob to save the name and return to the “NETWORK SETUP” menu. To display the MAC address assigned to the PSPHD: 1. Open the “NETWORK SETUP” menu as described on page 35. 2.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor “Front Panel Lock” Screen CONTROL SETUP Front Panel Lock Lock SOURCE 3. Cresnet ID Unlock SETUP MODE INFO Turn the selection knob to highlight the desired setting and press the selection knob to enable the setting and return to the “CONTROL SETUP” menu. A Net ID for control system communication over Cresnet can be assigned from the PSPHD’s front panel. To assign a Net ID: 1. Open the “CONTROL SETUP” menu as described on page 43. 2.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor “CONTROL SETUP” Screen (IP) CONTROL SETUP 03 SOURCE 3. MODE SETUP INFO Turn the selection knob to display the desired setting and press the selection knob to enable the setting and return to the “CONTROL SETUP” menu. NOTE: If an IP ID is set, Cresnet communications with the PSPHD are disabled. For more information on assigning IP IDs, refer to “Identity Code” which starts on page 24.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor “Control System IP Address” Screen CONTROL SETUP Control System IP Address [172] 032. 159. 122 SOURCE • MODE SETUP INFO b. Turn the selection knob to display the desired number. c. Press the selection knob to move the cursor to the next octet. d. Repeat steps b and c until the desired IP address is displayed. The IP address is entered after the last octet has been set. The display returns to the “CONTROL SETUP” menu. Hostname: a.
Crestron PSPHD Back PROCISE 7.3 Surround Sound Processor To return to the “INSTALLER MENU”: 1. Turn the selection knob until Back is displayed. 2. Press the selection knob to return to the “INSTALLER MENU”. About Use the About screen to view information about the PSPHD’s operating firmware. To open the About screen: 1. Open the “INSTALLER MENU” as described on page 30. 2. Turn the selection knob until About is displayed and press the selection knob. Information about the PSPHD is displayed. 3.
PROCISE 7.3 Surround Sound Processor Crestron PSPHD Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs or firmware) can be transferred to the control system (and/or device).
Crestron PSPHD PROCISE 7.3 Surround Sound Processor The USB port that is hidden on the front of the PSPHD connects to the USB port on the PC via the included Type A to Type B USB cable: TCP/IP 1. Use the Address Book in Crestron Toolbox to create an entry using the expected communication protocol (USB). When multiple USB devices are connected, identify the PSPHD by entering “PSPHD” in the Model textbox, the unit’s serial number in the Serial textbox, or the unit’s hostname in the Hostname textbox.
PROCISE 7.3 Surround Sound Processor Crestron PSPHD Program Checks Actions that can be performed on the PSPHD vary depending on whether it is connected via Cresnet or Ethernet. Cresnet Connections For Cresnet connections, using Crestron Toolbox, display the network device tree (Tools | Network Device Tree View) to show all network devices connected to the control system. Right-click on the PSPHD to display actions that can be performed on the PSPHD.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Operation Turn on the PSPHD To turn on the PSPHD, press STANDBY, SOURCE, MODE, SETUP, INFO, HOME, METER, SPECTRUM, or LEVEL. NOTE: Until Audyssey calibration has been performed, the PSPHD front panel shows a message every few seconds indicating that the system should be calibrated. Standby To place the PSPHD in the Standby mode, press STANDBY. The display and outputs are turned off and the STANDBY LED lights.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor If desired, it is possible to watch an HDMI video source while listening to a non-HDMI audio source (audio breakaway). To listen to a non-HDMI audio source that is different from the selected HDMI video source: 1. Select an HDMI video source as described on the previous page. 2. Turn the selection knob to the desired audio source. NOTE: The alternative audio source cannot be from an HDMI input. 3.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor To select a compression setting: 1. Press SETUP to display the “SETUP” menu. “SETUP” Menu SETUP Compression is Off SOURCE 2. MODE INFO SETUP Press the selection knob. “Compression” Screen SETUP Compression Off SOURCE Audyssey Dynamic EQ AUDYSSEY Dyn Vol MODE Dolby/DTS DRC SETUP INFO 3. Turn the selection knob to highlight the desired setting. 4. Press the selection knob to confirm the selection. 5.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor “AUDYSSEY Dynamic EQ” Screen SETUP AUDYSSEY Dynamic EQ SOURCE Audyssey MultEQ XT On Off MODE SETUP INFO 3. Turn the selection knob to highlight the desired setting. 4. Press the selection knob to confirm the selection. 5. Press HOME to return to the Home screen. Audyssey MultEQ XT can be applied to the incoming signal. NOTE: The Audyssey MultEQ XT function cannot be enabled unless a valid calibration has been performed with PROCISE Tools.
Crestron PSPHD Dolby TrueHD Auto Compression PROCISE 7.3 Surround Sound Processor Dolby TrueHD Auto Compression can be applied to an incoming signal encoded in Dolby TrueHD. NOTE: To apply Dolby TrueHD Auto Compression, the compression setting must be set to Dolby/DTS DRC and the selected source must contain a Dolby TrueHD signal. For information on setting compression, refer to “Compression” which starts on page 52. To enable Dolby TrueHD Auto Compression: 1. Press SETUP to display the “SETUP” menu. 2.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Treble Level The treble level can be adjusted with the PSPHD front panel. To adjust the treble level: 1. Press SETUP to display the “SETUP” menu. 2. Turn the selection knob to display Treble and press the selection knob to display the “Treble” screen. “Treble” Screen SETUP Treble 0.0 dB SOURCE Direct Mode MODE SETUP INFO 3. Use the selection knob to adjust the treble setting. To raise the treble level, turn clockwise.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Information The PSPHD can display information about the selected source. To view information: 1. Press INFO. 2. Turn the selection knob to scroll through available information. 3. Press HOME to return to the home display. VU Meter The PSPHD can display a VU meter showing the amount of watts delivered to each channel. NOTE: The VU meter receives calibration settings from the speaker impedance value.
PROCISE 7.3 Surround Sound Processor Crestron PSPHD Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. PSPHD Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION PSPHD does not function. PSPHD is not receiving power. Use the provided power cord. Verify connection. Sound is not heard. PSPHD is muted. Turn off mute function.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Cresnet power usage of that unit is the Cresnet power usage of the entire run. The wire gauge and the Cresnet power usage of the run should be used in the following equation to calculate the cable length value on the equation’s left side. Cable Length Equation L< 40,000 RxP Where: L = Length of run (or chain) in feet R = 6 Ohms (Crestron Certified Wire: 18 AWG (0.75 mm 2 )) or 1.
PROCISE 7.3 Surround Sound Processor Crestron PSPHD Future Updates As Crestron improves functions, adds new features and extends the capabilities of the PSPHD, additional information may be made available as manual updates. These updates are solely electronic and serve as intermediary supplements prior to the release of a complete technical documentation revision. Check the Crestron Web site periodically for manual update availability and its relevance.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor Appendix: Audyssey Laboratories, Inc. Established in 2002, Audyssey Laboratories, Inc. is the industry leader in researchbased sound equalization solutions for professional and consumer audio. Audyssey MultEQ XT is a room equalization solution that calibrates any audio system so that it can achieve optimum performance for every listener in a large listening area.
PROCISE 7.3 Surround Sound Processor Crestron PSPHD Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron PSPHD PROCISE 7.3 Surround Sound Processor This page is intentionally left blank. Operations Guide – DOC. 6837C PROCISE 7.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6837C (2024778) 02.13 Specifications subject to change without notice.