Specifications
PROCISE 7.3 Surround Sound Processor Crestron PSPHD
30 • PROCISE 7.3 Surround Sound Processor: PSPHD Operations Guide – DOC. 6837C
Configuration
After making all hardware connections to the PSPHD, the PSPHD must be
configured for operation. Basic configuration is performed with the “INSTALLER
MENU”. Advanced audio configuration options such as delay, levels, and
equalization are performed with Crestron Toolbox’ PROCISE Tools utility.
Information on using the “INSTALLER MENU” begins below. For information on
the PROCISE Tools utility, refer to the PROCISE Tools help file.
Open the “INSTALLER MENU”
To open the “INSTALLER MENU”, press and hold the HOME and DISPLAY
buttons for approximately five seconds. The left-hand display shows the
“INSTALLER MENU”.
“INSTALLER MENU”
INSTALLER MENU
Audio Setup
SOURCE MODE SETUP
INFO
Navigating the “INSTALLER MENU”
The following controls are used to navigate the “INSTALLER MENU”:
• Selection knob – Turn the selection knob to display the desired option. To
select the displayed option, press the selection knob.
• HOME button – Press HOME to return to the previous screen.
The “INSTALLER MENU” is divided into five sections to configure the PSPHD:
• Audio Setup: Defines the speaker configuration for the room connected to
the PSPHD.
• Network Setup: Pairs the PSPHD with a connected PROAMP amplifier and
defines/displays information about the PSPHD’s Ethernet configuration.
• Control Setup: Configures and displays the parameters that define the
PSPHD’s operation in a Crestron control environment.
• About: Displays information about the PSPHD’s firmware.
• Exit Installer Mode: Exits the “INSTALLER MENU”.