Specifications

PROCISE 7.3 Surround Sound Processor Crestron PSPHD
40 • PROCISE 7.3 Surround Sound Processor: PSPHD Operations Guide – DOC. 6837C
“Subnet Mask” Screen
NETWORK SETUP
Subnet Mask
[255] 255. 240. 000
SOURCE
MODE
SETUP INFO
3. Turn the selection knob to display the desired number.
4. Press the selection knob to move the cursor to the next octet.
5. Repeat steps 3 and 4 until the desired IP address is displayed. The subnet
mask is entered after the last octet has been set.
Default Router
The PSPHD’s default router can be displayed and changed. To display and change
the default router:
1. Open the “NETWORK SETUP” menu as described on page 35.
2. Turn the selection knob until the default router’s IP address is displayed. To
change the IP address, press the selection knob to display the “Default
Router” screen. The first octet of the default router’s IP address is enclosed
in brackets.
“Default Router” Screen
NETWORK SETUP
Default Router
[173
]
030.
161
. 001
SOURCE
MODE
SETUP
INFO
3. Turn the selection knob to display the desired number.
4. Press the selection knob to move the cursor to the next octet.
5. Repeat steps 3 and 4 until the desired IP address is displayed. The default
router is entered after the last octet has been set.
DHCP
The PSPHD’s IP address can be obtained from a DHCP server or manually set using
the front panel controls. The default setting for the DHCP mode is On. For
information on manually setting the IP address, refer to “IP Address” on page 39. To
set the DHCP mode:
1. Open the “NETWORK SETUP” menu as described on page 35.
2. Turn the selection knob until the DHCP setting is displayed. To change the
DHCP setting, press the selection knob to display the “DHCP” screen.