Specifications

PROCISE 7.3 Surround Sound Processor Crestron PSPHD
54 • PROCISE 7.3 Surround Sound Processor: PSPHD Operations Guide – DOC. 6837C
“AUDYSSEY Dynamic EQ” Screen
SETUP
AUDYSSEY Dynamic EQ
On
SOURCE MODE SETUP INFO
Off
3. Turn the selection knob to highlight the desired setting.
4. Press the selection knob to confirm the selection.
5. Press HOME to return to the Home screen.
Audyssey MultEQ XT
Audyssey MultEQ XT can be applied to the incoming signal.
NOTE: The Audyssey MultEQ XT function cannot be enabled unless a valid
calibration has been performed with PROCISE Tools.
NOTE: Until Audyssey calibration has been performed, the PSPHD front panel
shows a message every few seconds indicating that the system should be calibrated.
To enable Audyssey MultEQ XT:
1. Press SETUP to display the “SETUP” menu.
2. Turn the selection knob to display Audyssey MultEQ and press the selection
knob to display the “AUDYSSEY MultEQ” screen.
“AUDYSSEY MultEQ” Screen
SETUP
AUDYSSEY MultEQ
On
SOURCE MODE
SETUP
INFO
Off
3. Turn the selection knob to highlight the desired setting.
4. Press the selection knob to confirm the selection.
5. Press HOME to return to the home display.