Specifications

Crestron PSPHD PROCISE 7.3 Surround Sound Processor
Operations Guide – DOC. 6837C PROCISE 7.3 Surround Sound Processor: PSPHD • 55
Dolby TrueHD Auto
Compression
Dolby TrueHD Auto Compression can be applied to an incoming signal encoded in
Dolby TrueHD.
NOTE: To apply Dolby TrueHD Auto Compression, the compression setting must
be set to Dolby/DTS DRC and the selected source must contain a Dolby TrueHD
signal. For information on setting compression, refer to “
Compression” which starts
on page 52
.
To enable Dolby TrueHD Auto Compression:
1. Press SETUP to display the “SETUP” menu.
2. Turn the selection knob to display TrueHD Auto Compression and press the
selection knob to display the “Dolby TrueHD Auto Compression” screen.
“Dolby TrueHD Auto Compression” Screen
SETUP
Dolby TrueHD Auto Compression
On
SOURCE MODE
SETUP INFO
Off
3. Turn the selection knob to highlight the desired setting.
4. Press the selection knob to confirm the selection.
5. Press HOME to return to the home display.
Bass Level
The bass level can be adjusted with the PSPHD front panel. To adjust the bass level:
1. Press SETUP to display the “SETUP” menu.
2. Turn the selection knob to display Bass and press the selection knob to
display the “Bass” screen.
“Bass” Screen
SETUP
Bass 0.
0 dB
SOURCE
MODE SETUP
INFO
3. Use the selection knob to adjust the bass setting. To raise the bass level,
turn clockwise. To lower the bass level, turn counterclockwise.
4. Press the selection knob to confirm the selection.
5. Press HOME to return to the home display.