Specifications

PROCISE 7.3 Surround Sound Processor Crestron PSPHD
56 • PROCISE 7.3 Surround Sound Processor: PSPHD Operations Guide – DOC. 6837C
Treble Level
The treble level can be adjusted with the PSPHD front panel. To adjust the treble
level:
1. Press SETUP to display the “SETUP” menu.
2. Turn the selection knob to display Treble and press the selection knob to
display the “Treble” screen.
“Treble” Screen
SETUP
Treble 0.0 dB
SOURCE
MODE SETUP INFO
3. Use the selection knob to adjust the treble setting. To raise the treble level,
turn clockwise. To lower the treble level, turn counterclockwise.
4. Press the selection knob to confirm the selection.
5. Press HOME to return to the home display.
Direct Mode
The PSPHD has a Direct mode that can be used to support 192 kHz audio.
NOTE: The Direct mode should only be used when DTS 192 kHz is the input
source and the user wants a 192 kHz output.
In this mode, all post-processing functions (expansion/decoding modes, system EQs,
Audyssey, mixer and downmix functions) are disabled. To enable or disable the
Direct mode:
1. Press SETUP to display the “SETUP” menu.
2. Turn the selection knob to display Direct Mode and
press the selection knob
to display the “Direct Mode” screen.
“Direct Mode” Screen
SETUP
Direct Mode
On
SOURCE MODE SETUP INFO
Off
3. Turn the selection knob to highlight the desired setting.
4. Press the selection knob to confirm the selection.
5. Press HOME to return to the home display.