System information

Crestron 2-Series Control Systems Reference Guide
Reference Guide – DOC. 6256A 2-Series Control Systems • 147
Error Level Messages, T (continued)
MESSAGE DEFINITION
TransmitPacket: Error
sending to Ethernet
device name. Status:
nn.
Internal system error. Contact Crestron.
TxConsoleData: Error
writing to Tx2Pipe.
Internal system error. Contact Crestron.
U
MESSAGE DEFINITION
UDP_ListenTask: Bad
Socket Retured from
NU_Socket.
Internal system error. Contact Crestron.
UDP_ListenTask: bad
status from
NU_Recv_From: nn.
Internal system error. Contact Crestron.
UDP_ListenTask:
Error setting
UDP_CREATED flag.
Internal system error. Contact Crestron.
UDP_ListenTask:
Unable to allocate
memory for CIP
address struct.
Internal system error. Contact Crestron.
UDP_ListenTask:
Unable to allocate
memory for FromAddr
struct.
Internal system error. Contact Crestron.
UDP_ListenTask:
Unable to close
socket.
Internal system error. Contact Crestron.
UDP_Task: Error
allocating buffer
memory.
Internal system error. Contact Crestron.
UDP_Task: Error
waiting for Ethernet
init done.
Internal system error. Contact Crestron.
Unable to create
EventHandler.
Internal system error. Contact Crestron.
Unable to create
InputStringChanged
Event.
Internal system error. Contact Crestron.
Unable to create
PulseTimer.
Internal system error. Contact Crestron.
Unable to create
WaitEvent waitname.
Internal system error. Contact Crestron.
Unable to create
waitname
WaitEventGroup.
Internal system error. Contact Crestron.
Unable to create
waitname
WaitEventTask.
Internal system error. Contact Crestron.
(continued on next page)