Crestron QM-IEM Image Enhancer Module Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2004 Crestron Electronics, Inc.
Crestron QM-IEM Image Enhancer Module Image Enhancer Module: QM-IEM Introduction Features and Functions The QM-IEM is a module added to the output of the QM-RMCRX to improve performance when connected to digital light processing (DLP™) micro-electromechanical display. DLP technology uses fast switching optical semiconductors to digitally manipulate light. Some of these DLP devices are extremely sensitive to noise.
Image Enhancer Module Crestron QM-IEM Specifications SPECIFICATION DETAILS Wiring One D15HD male connector One D15HD female connector 41° to 104°F (5° to 40°C) 10% to 90% RH (non-condensing) H: 0.67 in (1.70 cm) W: 1.45 in (3.68 cm) D: 2.39 in (6.07 cm) Environmental Temperature Environmental Humidity Dimensions Physical Description Refer to the following illustrations. QM-IEM Male and Female Ends Physical Views of the QM-IEM 2 • Image Enhancer Module: QM-IEM Installation Guide - DOC.
Crestron QM-IEM Image Enhancer Module Industry Compliance As of the date of manufacture, the QM-IEM has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling (N11785). NOTE: This device complies with part 15 of the FCC rules.
Image Enhancer Module Crestron QM-IEM Problem Solving Troubleshooting TROUBLE No signal POSSIBLE CAUSE(S) Improper connection CORRECTIVE ACTION Check connection to display device and to the QM-RMCRX Further Inquiries If after reviewing this Installation Guide, you cannot locate specific information or have questions, please take advantage of the Crestron award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
Crestron QM-IEM Image Enhancer Module Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Installation Guide – DOC. 6270 03.04 Specifications subject to change without notice.
