Installation guide

Crestron QM-WMC/WMC-VCC/WCC-2 Media & Computer Centers
Cresnet Ports, QuickMedia Port and Grounding Lead Locations
Remove pre-cut
insulation and
connect this
grounding wire
to ground.
QuickMedia Port
Cresnet Port
5. Make sure the QM-WMC/WMC-VCC/WCC-2 is properly oriented
(labels are upright) and place it in the electrical box.
CAUTION: Excess wire that is pinched between the
QM-WMC/WMC-VCC/WCC-2 and the electrical box could short
out. Make sure all excess wire is completely inside the electrical box
and not between the box and the QM-WMC/WMC-VCC/WCC-2.
6. Attach the QM-WMC/WMC-VCC/WCC-2 to the electrical box
using the supplied #06-32 x 3/4” pan head screws as shown in the
following illustration.
Operations & Installation Guide – DOC. 6237C Wall Plate Media & Computer Centers • 27