Installation guide

Media & Computer Centers Crestron QM-WMC/WMC-VCC/WCC-2
Install QM-WMC/WMC-VCC/WCC-2 into Two-Gang Electrical Box
(QM-WMC Shown)
Electrical Box (Not Supplied)
Minimum Depth 2.5 In (64 mm)
Screws (4) #06-32 X 3/4"
(Supplied)
7. Attach an appropriate decorator style or equivalent faceplate (not
supplied).
8. Turn Cresnet system power ON.
Hardware Hookup
Make the necessary connections as called out in the illustrations that
follow this paragraph. Refer to “Network Wiring” on page 21 before
attaching the 4-position terminal block connector. Apply power after all
connections have been made.
When making connections to the QM-WMC/WMC-VCC/WCC-2, use
Crestron power supplies for Crestron equipment.
28 • Wall Plate Media & Computer Centers Operations & Installation Guide – DOC. 6237C