Installation guide

Crestron QM-WMC/WMC-VCC/WCC-2 Media & Computer Centers
• Additional QM-WMC/WMC-VCC/WCC-2 devices are assigned
different Net ID numbers as they are added.
• If necessary, double click a device to open the “Device Settings”
window and change the Net ID, as shown in the following figure.
“QM-WMC/WMC-VCC/WCC-2 Device Settings” Window
(QM-WMC Shown)
• The ID code specified in the SIMPL Windows program must
match the Net ID of each unit. Refer to “Identity Code” on page
23.
Program
Manager
Program Manager is the view where programmers “program” a Crestron
control system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it
into Detail View. Each signal in the symbol is described in the SIMPL
Windows help file (F1).
Operations & Installation Guide – DOC. 6237C Wall Plate Media & Computer Centers • 33