User Guide

Wall Plate Media Center Crestron QM-WMC
2. From the Viewport menu, select Functions | Serial Number
ÅÆ TSID Conversion Tool. The “Serial Number ÅÆTSID
Conversion Tool” window is displayed.
“Serial Number to TSID Conversion Tool” Window
3. Enter the serial number or TSID number as instructed; press
the appropriate button to obtain the corresponding number.
NOTE: Enter serial numbers, including spaces, exactly as they appear
on the unit label. Alpha characters in serial numbers or TSID numbers
may be entered in upper or lower case.
Installation
NOTE: If the QM-WMIC is to be used, refer to the installation
instructions in the latest revision of the QM-WMIC Operations &
Installation Guide (Doc. 6245) which can be downloaded from the
Downloads | Product Manuals section of the Crestron website
(www.crestron.com
).
The following tools/hardware are required for installation.
• CRESCAT-QM QuickMedia cable or equivalent (not supplied)
terminated with RJ-45 connector for media signals and mini-
phoenix connector for Cresnet signals. Refer to “QuickMedia
Wiring” on page 15 and “Network Wiring” on page 14 for pin
assignments.
• Phillips screwdriver (not supplied)
• Four 6-32 x ¾”L pan head Phillips screws (supplied)
22 • Wall Plate Media Center: QM-WMC Operations & Installation Guide - DOC. 6237A