User Guide

Wall Plate Media Center Crestron QM-WMC
Typical Connection Diagram when Uploading
1. Open the Crestron Viewport.
Either launch the stand-alone version of Viewport, or start
SIMPL Windows and from the menu bar, select Tools |
Viewport.
2. Refer to the figure after this step. From the Viewport menu,
select Setup | Communications settings (alternatively, press
Alt+D) to open the “Port Settings” window.
Setup | Communications Settings Command
3. Select RS-232 as the connection type. Verify that an available
COM port (COM 1 is shown after this step) is selected, and
36 • Wall Plate Media Center: QM-WMC Operations & Installation Guide - DOC. 6237A