User Guide

Crestron QM-WMC Wall Plate Media Center
Specifications
The following table provides specifications for the QM-WMC.
Specifications for the QM-WMC
SPECIFICATION DETAILS
Power Requirements
With Optional QM-WMIC
5 Watts (0.21 Amp @ 24 VDC)
8 Watts (0.33 Amp @ 24 VDC)
Default Network ID 04
Video Formats Composite, S-video, RGBHV
Video Detection Within 2 seconds
Firmware QM-WMC.V.2.360.upg or later
Control System Update Files
1,2
2-Series Control System Version 3.117.CUZ or later
Front Connectors:
Computer Input (1) DB15HD female, video
sensing on H-sync
Computer Output (1) DB15HD female for monitor
out
Computer Audio (1) 3.5mm mini-jack, computer
soundcard type
Composite Video (1) RCA (yellow), video sensing
Composite Video Audio (2) RCA (red and white)
S-video (1) Mini-DIN 4-pin, video sense
on luminance signal
S-video Audio (2) RCA (red and white)
Rear Connectors (QM-WMC):
QuickMedia Output (1) RJ-45 CAT5 to QuickMedia
transmitter
Cresnet (2) 4-pin mini-Cresnet
QM-WMIC (1) Multi-pin ribbon connector for
optional QM-WMIC
Ground (1) Flying ground lead
(continued on next page)
Operations & Installation Guide - DOC. 6237A Wall Plate Media Center: QM-WMC • 5