User Guide

Wired Touchpanels Crestron Series 1600
Leading Specifications
The table after this paragraph provides a summary of leading specifications for the
Series 1600 Touchpanels. Dimensions and weight are rounded to the nearest
hundredth unit.
NOTE: Check the Crestron FTP site (www.crestron.com) periodically for the latest
firmware versions. Search in the TOUCHPNL Library. New users are required to
register in order to obtain access to the FTP site.
Leading Specifications for Series 1600 Touchpanels
SPECIFICATION DETAILS
Power Requirements 6 Watts, 24 VDC 0.25 Amp
SIMPL
TM
Windows
®
Version 1.30.01 or later
1
with library update
file smwlib62.exe and update document
smwlib62.txt or late
r
CNMSX-AV/PRO Upgrade File (.upz)
Version 50135X or later
2
CNRACKX/-DP Upgrade File (.upz)
Version 50700W or later
2
CNMS, CNRACK, CNLCOMP Operating System
Version 3.18.09m, l, c or later
2
ST-CP Operating System
Version 4.00.49 or later
2
ST-CP Monitor
Version 1.29 or later
2
VisionTools
TM
Pro-e (VT Pro-e) Version 2.1.0 or later
1
Crestron Database
Version 14.01 or later
1
Memory 768K Flash for Display
CT-1600 & LC-1600 Height: 5.97 in (15.16 cm)
Dimensions & Weight Width: 7.67 in (19.48 cm)
Depth: 5.32 in (13.51 cm)
Weight: 2.82 lb (1.28 kg)
CT-, LC-1600L/W-DB & CT-, LC-1600L/W-DW Height: 6.49 in (16.49 cm)
Dimensions & Weight Width: 7.64 in (19.39 cm)
Depth: 1.68 in (4.26 cm)
Weight: 1.71 lb (0.77 kg)
View Screen Dimensions Height: 3.52 in (8.94 cm)
Width: 4.65 in (11.82 cm)
Screen Viewing Angles: CT Models
+/-50
o
for X dir and +40/-50
o
for Y dir
LC Models
+/-30
o
for X dir and +20/-30
o
for Y dir
View Screen Resolution 320 x 240 pixels
View Screen LCD: CT Models STN Transmissive color, dot matrix type
LC Models FSTN Transmissive mode, dot matrix type
View Screen Illumination Edgelit Fluorescent
View Screen Touch Screen Resistive Membrane
1 The latest software versions can be obtained from the Downloads page (SIMPLWIN, TOUCHPNL,
VTPRO-E, or CRESDB Libraries) of the Crestron website (www.crestron.com)
.
2 CNX upgrade files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX
upgrade files have a UPZ extension and SmarTouch files are in one EXE. All can be obtained from
the Downloads page (OPSYS Library) of the Crestron website.
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
4 • Series 1600 Wired Touchpanels Operations & Installation Guide - DOC. 5836A