Specifications

CRESTRON

Appendix: GRAFIK Eye Commands

NOTE: This entire appendix is a reprint of Lutron’s technical reference material.

Format for Commands

The RS-232 interface is commanded by ASCII strings in the following format.

Command

Parameters

: A 1 2 3 ... <CR>

Clea

Input

uffe

Command

Carriage

Return

Notice that capital letters must be used for commands and there are no spaces

between characters. To execute more than one command, enter a space instead of the

carriage return and enter the next command. Any number of commands can be

entered at one time, as long as the input buffer is less than or equal to 60 characters.

The commands are executed in the order they are entered. When commands have

been received by the RS-232 interface, the number of commands executed is

reported by the unit to the RS-232 link. The format for this is a statement in the

following form.

If unrecognizable data is received, an error statement in the following form is

reported.

<CR><LF>~ERROR # 6 0 OK<CR><LF>

The first number indicates the type of error and the second number indicates the

number of commands executed before the error. When referring to GRAFIK Eye

Main Units as command parameters, GRAFIK Eye 1 refers to the GRAFIK Eye

Main Unit addressed as A1; GRAFIK Eye 2 refers to the GRAFIK Eye Main Unit

addressed as A2, and so on. Up to eight GRAFIK Eye Main Units can be on the

MUX link.

GRX-AV-RS232 Command List

The following is a list of commands which can be used with both the GRX-AV-

RS232 and the GRX-AV-RS232/ATC Interface Controls.

(A) Select Scene

This command selects desired scenes on the specified GRAFIK Eye Main Unit(s).

The first parameter is the scene and the second is the GRAFIK Eye Main Unit(s)

which selects that scene. If an invalid GRAFIK Eye number is encountered, the

command only affects the GRAFIK Eye Main Units listed before the invalid entry.

For scene 10 enter an “A”; for scene 11, enter a “B”, and so on up to scene 16. Scene

numbers outside the range of 0-G return an error statement.

18 • Lutron Interface Operations Guide - Doc. 5694