Specifications

CRESTRON
Example:
:QS<CR>
Start
super sequence
.
(QP) Super Sequence Pause
This command stops the preprogrammed super sequence that is running at its current
step. If a super sequence is not running, the command does nothing. If a super
sequence has not been loaded using the GRAFIK Eye Timeclock software, an error
statement is reported. The sequence can be restarted from this point by a super
sequence resume command.
Example:
:QP<CR>
Stop
super sequence
at the current step.
(QC) Super Sequence Resume
This command restarts a stopped super sequence by immediately selecting the next
step. If a super sequence is not loaded, an error statement is reported.
Example:
:QC<CR>
Continue
super sequence
from the current step.
24 • Lutron Interface Operations Guide - Doc. 5694