Specifications

CRESTRON
Lutron Interface
Description
Functional Description
There are two CRESTRON Lutron Interface configurations available: ST-LT and
STI-LT. Configuration differences depend on which power pack is supplied. The
ST-LT includes a power pack for a 120V AC supply and the STI-LT includes a
power pack for 220V AC. For purposes of this Operations Guide, the term ST-LT is
used for either configuration.
The ST-LT is a device that permits the CRESTRON CRESNET II System or
SmarTouch STS to interface with a Lutron GRAFIK Eye Lighting System. Future
ST-LT production models shall permit an interface with the Lutron Homeworks
System. If the ST-LT is part of the CRESNET II System, use of the supplied power
pack is optional.
Physical Description
The ST-LT is housed in a black enclosure with silk-screened labels on the front and
rear panels. On the front of the unit there are seven LEDs for indicating the unit’s
current status. All connections are made on the back of the unit. Refer to the physical
views shown after this paragraph. There are four rubber feet on the base of the unit
for stability and to prevent slippage.
Operations Guide - Doc. 5694 Lutron Interface • 1