Specifications

Crestron STRFGWX Two-Way RF Transceiver
Preparation for Use
Refer to the hookup diagram below, which shows the STRFGWX connections to the
Cresnet system. Other than making the power connection last, complete the
connections in any order.
NOTE: Refer to “Network Wiring” on page 6 when making connections to the
ports labeled NET.
Cresnet System Hookup Connections for STRFGWX
24
NET
GZY
NETNET
.5A
12VDC
CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USA
FROM EXTERNAL
POWER PACK
TO CONTROL SYSTEM
FOR NORMAL OPERATION
OR PROGRAMMING
TO ANY STS OR CRESNET
NETWORK DEVICES FOR
NORMAL OPERATION OR
FOR PROGRAMMING
Identity Codes
The STRFGWX possesses two distinct types of identity codes: NET ID and RF
CHANNEL. These codes are assigned to the unit from Crestron software.
Identity Code
Every equipment and user interface within the Cresnet system requires a unique NET
ID. These codes are recognized by a two-digit hexadecimal number from 03 to FE.
The NET ID of the unit must match an ID code specified in the SIMPL Windows
program. The NET ID of the STRFGWX is factory set to 4F. The NET IDs of
multiple STRFGWXs must all be unique and changed from a personal computer
(PC) via SIMPL Windows or VT Pro-e.
NOTE: VT Pro-e is a Windows compatible software package for creating Crestron
touchpanel screen designs.
The method for changing the unit’s NET ID is identical regardless of the software
chosen. Complete the following steps to change the NET ID.
1. Attach one of the STRFGWXs to the control system (verify that the
software is running).
2. From the SIMPL Windows or VT Pro-e menu, select Tools | Viewport
to open the Crestron Viewport.
3. From the Viewport menu, select Functions | Set Network ID. The
software checks the baud rate and then opens the “Set Network ID”
dialog box.
Operations Guide - DOC. 5811A Two-Way RF Transceiver: STRFGWX • 7