Specifications

Two-Way RF Transceiver Crestron STRFGWX
5. Refer to the dialog box shown below and verify the
communications settings. Make sure that parity is set to None, data
bits to Eight, and XModem is selected.
Port Settings Dialog Box
6. As shown below, select File Transfer | Load Network Device
from the Viewport menu.
Select Load Network Device
7. As shown on the next page, select the NET ID of the STRFGWX
and then click OK.
10 • Two-Way RF Transceiver: STRFGWX Operations Guide - DOC. 5811A