Specifications

Two-Way RF Transceiver Crestron STRFGWX
PWR
This LED (green) illuminates when power is supplied to the STRFGWX.
NET
This LED (yellow) illuminates when communication with the Cresnet system and the
STRFGWX is established. Illumination indicates that the SIMPL program currently
loaded has a network device defined at the same NET ID code as the STRFGWX.
RF
These three red LEDs monitor the RF communications of the STRFGWX. The SIG
LED illuminates when the STRFGWX is in communication with a touchpanel. If
multiple units have been installed to expand the roaming capabilities of a touchpanel,
the SIG LED of the STRFGWX that is in communication with the touchpanel will be
illuminated, all others are out. The Rx LED illuminates when a command is received
from a touchpanel and Tx illuminates when a command is transmitted to a touchpanel.
Leading Specifications
The table below provides a summary of leading specifications for the STRFGWX.
Dimensions and weight are rounded to the nearest hundredth unit.
Leading Specifications of the STRFGWX
SPECIFICATION DETAILS
Power Requirements
12VDC, external power pack or
24VDC, 0.125 amps, 3W, network
Default NET ID
4F
1
RF Communications
2-Way, 418MHz
Operating Ranges
Minimum Distance
3 ft
2
Maximum Distance Indoor
50 to 75 ft
2
Maximum Distance Outdoor
150 ft
SIMPL Windows
Version 1.30.01 or later
3
with the addition of
smwlib70.exe and smwlib70.txt.
3
OR
version 1.40.02 or later.
3
Crestron Database
Version 12.1.4 or later
3
for SmarTouch
Wizard support or 12.1.3 later
3
for regular
support (use a
CT-1600 model).
Firmware
STRFGWX
Version 2.4.1 or later.
4 & 5
Touchpanel
Version 5.077.0 or later.
4 & 5
CEN/CN-TVAV Update File
Version 51205V.UPZ or later.
6
CNMSX-AV/Pro Update File
Version 51020X.UPZ or later.
6
CNRACKX/-DP Update File
Version 51020W.UPZ or later.
6
ST-CP Update File
Version 40104S.UPZ or later.
6
Dimensions & Weight
Hei
g
ht: 1.70 in
(
4.32 cm
)
Width: 7.07 in
(17.95 cm)
Depth: 6.32 in
(
16.06 cm
)
Weight: 2.10 lb (0.95 kg)
7
1 If changing the default NET ID, do NOT set the NET ID to 1B or the unit will have to
be returned to Crestron.
4 • Two-Way RF Transceiver: STRFGWX Operations Guide - DOC. 5811A