Specifications

CRESTRON
“MUTED” is sent to the touchpanel. When the ST-VC is unmuted, a space is sent to
the touchpanel.
Block Diagram of STX-1600C
How to Create the Program
Configuration Manager
Use the Configuration Manager workspace (Project | Configure System) in SIMPL
Windows to select and configure all the devices that need to be included into the
system. For this example, add a CNRFGWX and ST-VC to the system. The NET ID
of each device must be set as shown below and on the next page.
NOTE: SIMPL Windows v1.21.04 or later is required to program the control
system containing a STX-1600C touchpanel. If using an earlier version of SIMPL
Windows, Crestron recommends a SIMPL Windows and operating system upgrade.
The latest version can be obtained from the Software Downloads page of Crestron’s
website (www.crestron.com)
. New users are required to register in order to obtain
access to the FTP site.
Network System View of CNRFGWX in SIMPL Windows’ Configuration Manager
Operations Guide - DOC. 5716A Series STX Touchpanels • 17