Specifications

Crestron STX-1700CXP 2-Way RF Wireless Touchpanel
Operations Guide – DOC. 6227A 2-Way RF Wireless Touchpanel: STX-1700CXP • 15
The System Views lower pane displays the PRO2 system tree (refer to graphic
below). This tree can be expanded to display and configure the communications
ports.
Expanded PRO2 System Tree
C2Net-Device Slot in Configuration Manager
To incorporate an STX-1700CXP into the system, a gateway device is required. The
C2Net-Device Slot can accept a gateway such as the TPS-RFGWX. Once a gateway
is configured in a C2Net-Device Slot, the slot allows Cresnet communication
between the touchpanel and the control system.
In Configuration Manager, drag the TPS-RFGWX gateway from the Wireless
Receivers (RF) folder of the Device Library and drop it in the upper pane of the
System Views. The System Views upper pane displays the TPS-RFGWX device icon
below the PRO2 graphic.
Drag the STX-1700CXP from the Touchpanels (Wireless | Wireless Two-Way)
folder of the Device Library and drop it on the TPS-RFGWX symbol in System
Views. The PRO2 system tree displays the TPS-RFGWX gateway in Slot 9, with a
default Net ID of 52. The TPS-RFGWX displays the touchpanel at the touchpanel’s
default RF ID location, “01,” as shown in the graphic below.
C2Net Device, Slot 9
Double-click the TPS-RFGWX icon in the upper pane to open the “Device Settings”
window. This window displays TPS-RFGWX device information. Select the Net ID
tab to change the gateway Net ID, as shown in the following graphic.