Specifications

2-Way RF Wireless Touchpanel Crestron STX-1700CXP
24 • 2-Way RF Wireless Touchpanel: STX-1700CXP Operations Guide - DOC. 6227A
“Port Settings” Window
8. Proceed to “Uploading a VT Pro-e Project” below or “Firmware
Upgrade” that begins on page 25, as appropriate.
Uploading a VT Pro-e Project
A compiled VT Pro-e file has the
extension .vtz
To upload a compiled VT Pro-e project to the STX-1700CXP, complete the
following steps.
1. Make sure that “Communication Settings” that begins on page 21 has
been performed.
2. As shown below, select File Transfer | Send Touchpanel
(alternatively, depress Alt+T) from the Viewport menu.
Select Send Touchpanel
3. As shown below, select the Net ID of the STX-1700CXP and then click
OK. The “Touchpanel Transfer” window appears (refer to graphic on
the next page).
“Select Network ID” Window