Specifications

Crestron STX-1700CXP 2-Way RF Wireless Touchpanel
Operations Guide – DOC. 6227A 2-Way RF Wireless Touchpanel: STX-1700CXP • 25
“Touchpanel Transfer” Window
4. Click Browse. The “Open” window appears as shown below.
5. Select the VT Pro-e (.vtz) file and click Open. The transfer completes
automatically.
Select VTZ File
6. Disconnect the programming cable and the external power pack from
the touchpanel.
7. Close the Viewport, exit VT Pro-e, and disconnect the programming
cable from the PC and the control system.
Firmware Upgrade
A firmware upgrade file has the
extension .csf
To take advantage of all the available features, it is important that the unit contains
the latest firmware. Please check the Crestron website for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the STX-1700CXP firmware, complete the
following steps.
1. Make sure that “Communication Settings” that begins on page 21 has
been performed. Suggested baud rate is 38400.
2. As shown on the next page, select File Transfer | Update
Touchpanel/Keypad Firmware from the Viewport menu.