Specifications

Crestron STX-1700CXP 2-Way RF Wireless Touchpanel
Operations Guide – DOC. 6227A 2-Way RF Wireless Touchpanel: STX-1700CXP • 1
• 5.7" (14.48 cm) active color matrix display
• 320 x 240 screen resolution
• 63MIPs ColdFire processor running Crestron Isys
®
-generation firmware
• 16-bit non-palette graphics
• 64,000-color Crestron Isys engine
• 4 MB of flash memory (approx. 3MB for user display lists)
• 8 MB of SDRAM
• Long-life NiMH battery
− Fast charging
− No battery memory
• “Wi-Fi friendly” operating frequency selection to avoid interference
• Compatible with TPS-RFGWX RF gateways that are not Wi-Fi friendly. *
2-Way RF Wireless Touchpanel:
STX-1700CXP
Introduction
Functions and Features
The STX-1700CXP is a two-way wireless radio frequency (RF) compact color
touchpanel that utilizes 2.4 GHz spread spectrum technology to provide a user
interface to a Crestron
®
control system (Cresnet
®
system). The “Wi-Fi friendly”
touchpanel is a handheld transceiver that communicates through Crestron’s
gateway/transceiver, the TPS-RFGWX (sold separately), to the Cresnet system.
(Refer to “Wi-Fi Technology” and “Gateway Compatibility” on page 2 for more
details.) The two-way communications provide control of third party and Cresnet
devices and dynamic onscreen feedback for real-time confirmation of commands. Up
to 15 touchpanels can communicate with one TPS-RFGWX. RF signals can travel
from a minimum of three feet up to a maximum between 100 - 200 feet; the range is
dependent on location of the touchpanel, the construction of the building, and
obstructions and RF interference from other devices. Location and antenna
orientation of the TPS-RFGWX also are important factors in RF
reception/transmission.
Functional Summary
*Refer to “Gateway Compatibility” on page 3 for details.