Specifications

2-Way RF Wireless Touchpanel Crestron STX-1700CXP
4 • 2-Way RF Wireless Touchpanel: STX-1700CXP Operations Guide - DOC. 6227A
Specifications of the STX-1700CXP Touchpanel (continued)
SPECIFICATION DETAILS
Default RF Channel³ 01 (Identifies RF gateway to be used for
communication.)
Default RF Band³ Band 0 (USA Original) Ten frequency bands
(ranges) available for selection.
Default Timeouts 10 minutes for standby
30 minutes for power down
Signal Join Maximums 4000 digital, 1024 analog, 127 serial input, 255
serial output
Control System Update Files
4, 5, 6
2-Series Control System
CEN/CN-TVAV
CNMSX-AV/Pro
CNRACKX/-DP
ST-CP
Version C2-3.044.CUZ or later
Version 5.12.63V.UPZ or later
Version 5.14.02X.UPZ or later
Version 5.14.02W.UPZ or later
Version 4.02.02S.UPZ or later
Acceptable file extensions
7
.vtz
.csf
projectname.vtz (compiled file)
STX1700CXP.vx.xxx.x.csf (panel firmware)
TPS-RFGWX firmware Version 2.15 or later
Memory 4 MB flash memory (3 Mbytes available for
user programming)
8 MB SDRAM
Touchscreen Dimensions Height: 3.700 in (9.017 cm)
Width: 4.700 in (11.938 cm)
Touchscreen Resolution 320 x 240 pixels
Touchscreen Viewing Angles ±65° for X dir, +65°/-40° for Y dir
Touchscreen LCD Active matrix, 64K colors
Touchscreen Illumination Backlit fluorescent
Touchscreen Composition Resistive Membrane
Operating Temperature 50° to 113°F (10° to 45°C)
Humidity 10% to 90% RH (non-condensing)
Overall Dimensions Width: 8.75 in (22.23 cm)
Height: 3.85 in (9.78 cm)
Depth: 5.51 in (14.00 cm)
Weight
8
1.85 lb (0.84 kg)
1. Battery life is 180 minutes continuous usage with background lighting at full brightness. Actual
operating time depends on usage and settings for background brightness and timeouts.
2. Requires Crestron TPS-RFGWX 2-Way RF Gateway/Transceiver. The RF signals can travel from a
minimum of three feet up to a maximum between 100 - 200 feet; the range is dependent on construction
of the building, obstructions, and RF interference from other devices. The location of the TPS-RFGWX
and the orientation of the antenna are also important factors in the RF performance.
3. Refer to “Identity Codes” on page 7 for details.
4. The latest versions can be obtained from the Crestron website. Refer to NOTE after last footnote.
5. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
6. CNX update files are required for either CNMSX-AV/PRO or CNRACKX/-DP. Filenames for CNX
update files have a UPZ extension and are in one EXE or zipped UPZ file. To avoid program problems,
make certain you are using the update file with the correct suffix letter (e.g., S, V, W, X).
7. In DETAILS, projectname represents assigned project name, and vx.xxx.x represents a version number.
8. The weight listed for the touchpanel does not include the ST-BTPN, ST-DSN or external power pack.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may
be required to register to obtain access to certain areas of the site (including the FTP site).