Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Regulatory Compliance As of the date of manufacture, the TPMC-8X-DSW has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Contents Wall Mount Docking Station for TPMC-8X Series: TPMC-8X-DSW 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ...........................................................................................
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Wall Mount Docking Station for TPMC-8X Series: TPMC-8X-DSW Introduction The Crestron® TPMC-8X-DSW Wall Mount Docking Station facilitates charging of the Isys® TPMC-8X Series WiFi Touch Screens while simultaneously enabling full wired touch screen operation.
Wall Mount Docking Station for TPMC-8X Series Crestron TPMC-8X-DSW Multi-Battery Charger The TPMC-8X-DSW not only charges the touch screen’s internal battery, it can charge an optional external battery pack as well. In fact, it can charge one external battery pack attached to the touch screen while simultaneously charging a second spare external battery pack placed in its own charging slot within the docking bay.
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Physical Description This section provides information on the connections, controls and indicators available on the TPMC-8X-DSW. TPMC-8X-DSW Overall Dimensions (Front View with Bezel) 1 10.16 in (258 mm) 2 3 11.74 in (298 mm) TPMC-8X-DSW Overall Dimensions (Front View Bezel Removed) 4 7.38 in (188 mm) (4x) 0.17 in Thru (5 mm) 11.19 in (284 mm) Operations & Installation Guide – DOC.
Wall Mount Docking Station for TPMC-8X Series Crestron TPMC-8X-DSW TPMC-8X-DSW Overall Dimensions (Side View) 9.26 in (235 mm) 5 7.92 in (201 mm) 6 7 8 3.67 in (93 mm) 4.21 in (107 mm) 0.48 in (12 mm) TPMC-8X-DSW Overall Dimensions (Bottom View) 2.06 in (53 mm) 1.19 in (30 mm) 4 • Wall Mount Docking Station for TPMC-8X: TPMC-8X-DSW 3.21 in (82 mm) 0.44 in (11 mm) Operations & Installation Guide – DOC.
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Connectors, Controls & Indicators # CONNECTORS1, CONTROLS & INDICATORS 1 Power/Suspend Button 2 Charging Status LED 3 Docking Port 4 Audio Output Switch (1) Two-position switch (behind front bezel); Enables/disables AUDIO connector AUDIO (1) 5-pin 3.
Wall Mount Docking Station for TPMC-8X Series Crestron TPMC-8X-DSW Setup Ethernet Unlike other Crestron network devices, the TPMC-8X-DSW does not use Cresnet for communications between the device and the control system. The TPMC-8X-DSW requires the use of a high-speed Ethernet connection for control system communications. For information on connecting Ethernet devices in a Crestron system, refer to the latest version of the Crestron e-Control Reference Guide (Doc. 6052).
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series 3. Since the TPMC-8X-DSW contains moving parts, mounting to a stud offers more support and is therefore highly recommended. Although Crestron offers the post-construction WMKM-8X-DSW and WMKT-8X-DSW mounting options, a mounting option that is secured to a stud, such as the BB-8X-DSW or PMK-8X-DSW is highly recommended. NOTE: The following steps are performed only after the BB-8X-DSW or PMK-8X-DSW has been installed.
Wall Mount Docking Station for TPMC-8X Series b. Crestron TPMC-8X-DSW Slide the connector to remove it from its slot on the bezel, as shown in the following illustration. Slide Connector from Bezel c. The mating connector on the TPMC-8X-DSW is taped to the inside, as shown in the following illustration. Mating Connector Taped to Inside of TPMC-8X-DSW d. Remove the tape and connect the mating connector to the connector on the bezel, as shown in the illustration below.
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series e. Slide the assembled connector back into its slot on the bezel, as shown in the illustration below. Assembled Connector in Slot on Bezel 6. To cover the mounted unit with the bezel, make sure the lip near the top of the bezel is inserted into the TPMC-8X-DSW just below the latch that locks onto the top of the touch screen. Then make sure the bottom of the bezel engages the four clips on the bottom edge of the TPMC-8X-DSW.
Wall Mount Docking Station for TPMC-8X Series Crestron TPMC-8X-DSW 2. To remove the bezel from the TPMC-8X-DSW, first remove the two rubber caps covering the screws near the top of the bezel. Then remove the screws that secure the bezel to the TPMC-8X-DSW. Gently pry the top of the bezel away from the TPMC-8X-DSW and finally, lift the bezel slightly to clear the four clips on the bottom edge of the TPMC-8X-DSW. Do not apply excessive pressure. 3.
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Operation The TPMC-8X-DSW docks the TPMC-8X Series touch screen, provides power and communication and recharges the internal battery and up to two (optional) external battery packs. Operation consists of docking the touch screen (performed by hand) into the TPMC-8X-DSW or undocking electrically via the touch screen and then removing by hand.
Wall Mount Docking Station for TPMC-8X Series Crestron TPMC-8X-DSW may then be removed by hand by lifting it to disengage the docking station connector. Manual Undocking of Touch Screen Using Supplied Hardware Key Hard Button #4 12 • Wall Mount Docking Station for TPMC-8X: TPMC-8X-DSW Operations & Installation Guide – DOC.
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPMC-8X-DSW Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION TPMC-8X-DSW does not unlatch the touch screen. Touch screen is not properly docked.
Wall Mount Docking Station for TPMC-8X Series Crestron TPMC-8X-DSW Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron Web site (www.crestron.com/manuals).
Crestron TPMC-8X-DSW Wall Mount Docking Station for TPMC-8X Series Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 7080B (2028797) 08.12 Specifications subject to change without notice.