Crestron TPMC-4SM ® Isys i/O 4.
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Regulatory Compliance As of the date of manufacture, the TMC-4SM has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC rules.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center Contents Isys i/O® 4.3” Wall Mount Touchpanel Media Center: TPMC-4SM 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications.................................................................................................
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center ® Isys i/O 4.3” Wall Mount Touchpanel Media Center: TPMC-4SM Introduction With its clean, contoured appearance, the Isys i/O® TPMC-4SM Wall Mount Touchpanel Media Center makes an elegant statement in any environment.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Features and Functions (Continued) • • • • • • • • • • • • • • • Streaming video Crestron® IP intercom WAV file audio feedback Built-in microphone and speaker Built-in proximity sensor 10 optional “hard key” pushbuttons Dual color button backlighting and feedback Engravable button text RoomView® Room Scheduling mode Room occupancy sensor option Single wire Ethernet connectivity PoE network powered Available in gloss black or white Fits in a h
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center For more information, refer to the latest version of the Crestron RoomView Server Edition Installation Guide (Doc.6543), which is available from the Crestron website at www.crestron.com/manuals. Occupancy Sensing Crestron GLS-series room occupancy sensors can be connected directly to the TPMC-4SM to allow automation of the room’s lighting, climate control and other devices.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM inch from the wall surface. For impenetrable surfaces, such as decorative glass, granite, marble, plaster, smooth stone and masonry, Crestron offers the MSMK-4SM Multi-Surface Mount Kit (sold separately), providing a very versatile mounting solution complete with a low-profile rear shell enclosure, adhesive mounting plate, optional angle bracket and wire raceway.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Specifications Specifications for the TPMC-4SM are listed in the following table. TPMC-4SM Specifications SPECIFICATION DETAILS Touchscreen Display Display Type TFT active matrix color LCD Size 4.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM TPMC-4SM Specifications (Continued) SPECIFICATION DETAILS Environmental Temperature 32º to 104º F (0º to 40º C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 14 BTU/Hr Enclosure Construction Plastic Front Bezel Plastic, includes button and no-button covers, button covers include default engraving, custom engraving sold separately Mounting Requires a horizontally oriented 1-gang electrical box or plaster ring or a 1-gan
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center Physical Description This section provides information on the connections, controls and indicators available on your TPMC-4SM. TPMC-4SM Physical View Operations & Installation Guide – DOC.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM TPMC-4SM Overall Dimensions (Front, Bottom and Rear Views) 1 1 3.47 in (89 mm) 6.20 in (158 mm) 2 0.75 in (19 mm) 1.21 in (31 mm) 0.46 in (12 mm) 3 4 1.70 in (44 mm) 2.36 in (60 mm) 2.00 in (51 mm) 3.25 in (83 mm) 8 • Isys i/O® Wall Mount Touchpanel Media Center: TPMC-4SM Operations & Installation Guide – DOC.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 1 HARD KEYS1 with FEEDBACK/ BACKLIGHT (10) Optional programmable pushbuttons, translucent backlit with (1) red and (1) green LED per hard key.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Setup Network Wiring When wiring the Ethernet network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (www.crestron.com/calculators).
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center Configuring the Touchpanel NOTE: The only connection required to configure the touchpanel is power. Refer to “Hardware Hookup” on page 25 for details. The setup screens allow basic configuration procedures prior to regular operation of the touchpanel. To enter the setup screens, touch the panel while applying power to the unit.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Ethernet Setup Touch Ethernet Setup to display information about your Link Status, Control Connection, MAC and IP addresses and to access the Control System Settings and IP Address Settings buttons and their respective submenus. Touch Back to return to the “Panel Setup Options” screen.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center On-Screen Keyboard for IP Address / Hostname Touch OK to add the entry or CANCEL to cancel it. When you are returned to the “Edit Control System Settings” screen, touch Save to keep the new setting or Cancel to cancel it. On the TPMC-4SM, DHCP is enabled by default. To switch to a static IP address, touch IP Address Settings on the “Ethernet Setup” screen, to access the “Edit IP Address Settings” screen.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM “Edit IP Address Settings” Screen (for DNS and WINS Servers) Audio Setup On the “Panel Setup Options” screen, touch Audio Setup to display the “Audio Setting” screen. This screen provides controls for Master Volume, KeyClick Volume, Wave Volume, Mute controls for all three and a Play Test Wave button. Touch Back to return to the “Panel Setup Options” screen.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center Standby Setup On the “Panel Setup Options” screen, touch Standby Setup to display the “Standby Timeouts” screen. This screen provides controls to adjust Standby Timeout from 0 to 120 seconds. Touch Back to return to the “Panel Setup Options” screen. “Standby Timeouts” Screen Display Settings On the “Panel Setup Options” screen, touch Display Settings to enter the “Display Settings” screen.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Touch Left LED Color Settings to enter the “Display Settings” screen for Left Bank LED Color. Options are Green, Red and Off. Touch Back to return to the main “Display Settings” screen. “Display Settings” Screen (for Left Bank LED Color) NOTE: The Right LED Color Settings button takes you to a similar screen, where the Right Bank LED Color can be selected.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM System Messages Enabled/Disabled On the “Panel Setup Options” screen, the System Messages Disabled (the default setting) button toggles between this state and System Message Enabled, allowing you to turn system message on or off. About On the “Panel Setup Options” screen, the About button opens a small window displaying the Firmware Version and the OS Image Version. Click OK to close the window.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Touch Keypad Test to display the “Diagnostics – Keypad Test” screen. Use this screen to test the function of the hard key pushbuttons on either side of the screen. When a button is pressed, its corresponding button will light on the screen. Touch Back to return to the main “Diagnostics” screen.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center On the main “Diagnostics” screen, touch Sensor Test to display the “Diagnostics – Sensor Tests” screen. If contact sensors are connected to the TPMC-4SM, the respective indicator will change from Inactive to Active as appropriate for each sensor’s activity. Similarly, the TPMC-4SM’s own proximity sensor’s indicator will change from Inactive to Active when the TPMC-4SM senses motion in front of the unit.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Changing the Button Inserts The TPMC-4SM ships with 10 “hard key” pushbuttons for quick access to commonly used functions. For a clean appearance, either column of buttons may be removed and covered using the no-button covers provided. To change the inserts, use the following procedure: 1. Insert a small, slot head screwdriver into the appropriate hole on the bottom of the TPMC-4SM to release its cover. Refer to the following illustration.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM TPMC-4SM with No-Button Covers Installation The TPMC-4SM touchpanel installs simply and cleanly into a standard electrical box or on to virtually any flat surface. A table top enclosure, the TTK-4SM and swivel mount, SMK-4SM are also available (both sold separately). For mounting onto a flat surface, use the MSMK-4SM Multi-Surface Mounting Kit (sold separately). The TPMC-4SM is supplied with screws for installation into an electrical box.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM NOTE: Use the left and right screw holes for attachment to the electrical box. Mounting the TPMC-4SM into an Electrical Box 3. Carefully position the front of the TPMC-4SM over the back panel and gently snap it into place, as shown in the following illustration. Snap the TPMC-4SM into Place 22 • Isys i/O® Wall Mount Touchpanel Media Center: TPMC-4SM Operations & Installation Guide – DOC.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM 4. Use two of the included #04-40 x 1/4” screws to secure the TPMC-4SM, as shown in the following illustration: a. For standard applications, use the Phillips screws (2007152 or 2007160). b. For secure applications, use the security type Torx screws (2025311 or 2025312) along with the included Torx screwdriver bit (2025915). NOTE: Parts 2007152 and 2025311 come with black models. Parts 2007160 and 2025312 come with white models.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Mounting in a European Electrical Box To mount the TPMC-4SM into a European electrical box, use the following procedure: 1. Insert a small slot head screwdriver into the hole shown in the illustration at the top of page 21 and gently separate the back of the TPMC-4SM. 2. Use the two included #4B x 3/4” screws (2019088) to attach the back panel to the electrical box, as shown in the following illustration.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph. Apply power after all connections have been made. When making connections to the TPMC-4SM, use Crestron power supplies for Crestron equipment.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at www.crestron.com/support. First-time users will need to establish a user account.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Locating the TPMC-4SM in the Device Library 2. The system tree of the control system displays the device in the appropriate slot with a default IP ID as shown in the following illustration. C2Net Device, Slot 8 3. Additional TPMC-4SM devices are assigned different IP ID numbers as they are added. 4. If necessary, double click a device to open the “Device Settings” window and change the IP ID, as shown in the following figure.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM “Device Settings: Crestron TPMC-4SM” Window 5. Program Manager The ID code specified in the SIMPL Windows program must match the IP ID of each unit. Refer to “Identity Code” on page 10. Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center help file in VT Pro-e to learn how to use its audio tool, Sound Manager, to attach WAV files to a touchpanel project. Pre-recorded WAV files for voice prompts and responses are available from Crestron. These files can be stored into and programmed for use in the touchpanel directly or may be edited with the Sound Recorder. For example, the individual files can be combined to create custom messages.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Relationship of Bits to Colors NUMBER OF BITS 1 bit NUMBER OF COLORS Black and White 2 bits 4 Colors 4 bits 16 Colors 8 bits 256 Colors 16 bits 65,536 Colors (Highcolor) 24 bits 16.7 million Colors (Truecolor) 32 bits 16.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center Pushbutton Programming The buttons can be programmed to access any frequently used command. Each button has a default digital join number. Refer to the following illustration for their assigned join numbers. These can be modified using the VT Pro-e Hard Button Manager. Pushbutton Layout and Join Number Assignment MultiByte International Characters Most languages use a single byte of eight bits to represent a character, e.g.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs, projects or firmware) can be transferred to the control system (and/or device).
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM 4. Display the “System Info” window (click the TPMC-4SM entry. icon) and select the Programs, Projects and Firmware Program, project or firmware files may be distributed from programmers to installers or from Crestron to dealers. Firmware upgrades are available from the Crestron website as new features are developed after product releases.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPMC-4SM Troubleshooting TROUBLE Device does not function. TPMC-4SM is not responding. TPMC-4SM boots up in setup screens every time. POSSIBLE CAUSE(S) CORRECTIVE ACTION Device is not communicating with the network.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling Crestron at 1-888-CRESTRON [1-888-273-7876]. You can also log onto the online help section of the Crestron website (www.crestron.com/onlinehelp) to ask questions about Crestron products.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Isys i/O® Wall Mount Touchpanel Media Center Crestron TPMC-4SM Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron TPMC-4SM Isys i/O® Wall Mount Touchpanel Media Center This page is intentionally left blank. Operations & Installation Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 6845A (2024510) 11.09 Specifications subject to change without notice.