Specifications

12 Inch Tilt/Lectern Touchpanels Crestron TPS-4500V & TPS-4500LV
RS-232 Pinouts
PIN # DESCRIPTION
1 CTS
2 GND
3 RXD
4 TXD
5 RTS
6 N/C (Not connected)
16
1
6
Front
Top
PC to TPS-4500V/LV Cable Specifications (Crestron Cable Number STCP-502PC)
Video
Three connectors are provided for supplying a composite or S-video signal to the
TPS-4500LV. The TPS-4500LV can accept balanced video signals using CAT5
wiring or unbalanced signals using the BNC connectors. Refer to the following
diagram to make video connections to the TPS-4500LV.
Video Connections
S-VIDEO
LUMINANCE
OR COMPOSITE
VIDEO INPUT #1
NTSC/PAL INPUT
S
CS ++ - - Y
C Y
COMP
S-VIDEO
CHROMINANCE
S-VIDEO
LUMINANCE
OR COMPOSITE
VIDEO INPUT #1
S-VIDEO
CHROMINANCE
NOTE: For additional information on video connections over CAT5, refer to the
latest version of the Crestron CAT5 Wiring Reference Guide (Doc. 6137) which is
available from the Downloads | Product Manuals section of the Crestron website
(www.crestron.com).
After connecting the video cables to a specific connector, the video input must be set
in the Video Menu. Refer to “Video Menu” on page 13 for more information.
16 • 12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV Operations Guide - DOC. 6160