This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel Contents RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA Description Functional Description Physical Description Leading Specifications Computer Video Connector Signals Preparation Installation and Hookup Touchpanel Setup Configuring the Touchpanel SIMPL™ Windows® Programming VT Pro-e Setup Problem Solving Troubleshooting Further Inquiries Future Updates Future Firmware Upgrades Appendix: Optional Touchpanel Setups Serial Mouse Cont
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA Description Functional Description The TPS-XVGA RGB computer interface card is an optional feature designed for Crestron’s Isys™ TPS-5000 and TPS-6000 tilt touchpanels. Through an RGB window on a page within the uploaded VisionTools™ Pro-e (VT Pro-e) touchpanel project, the card allows computer video to be displayed on the touchpanel full screen or in a window.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA Physical Description The TPS-XVGA, shown below, is a printed circuit board (PCB) designed to be installed into a specific expansion slot in the TPS touchpanel. The card is secured to the motherboard of the touchpanel with four supplied mounting screws. The card contains a 60-pin connector that attaches directly to the motherboard and a standard DB15 mini-computer video connector.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel Leading Specifications es a summary of leading specifications for the TPS XVGA. Dimensions and weight are rounded to the nearest Leading Specifications of the -XVGA SPECIFICATION Power Requirements SIMPL™ Windows® VisionTools™ Pro-e Isys Touchpanel Firmware CEN/CN-TVAV Update File CNMSX-AV/Pro Update File CNRACKX/-DP Update File ST-CP Update File CNMS, CNRACK, CNLCOMP Operating System Max.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA for which it was intended, it may lockup the control system which would then have to be returned to Crestron. Update files with an “S” designator are for the ST-CP, “V” designator for CEN/CN-TVAV, “W” for CNRACKX/-DP, and “X” for CNMSX-AV/Pro control systems. Control systems are able to recognize and reject incorrect update files. However, when updating control systems, do not ignore any Crestron Viewport warning prompts or messages.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel removed to prevent over-heating of the card during operation. The only tools required for this procedure are a tool to open the packing box and a grounding strap (or grounded workstation). CAUTION: The TPS-XVGA contains ESD sensitive devices. Perform the following procedure while wearing a grounding strap that is properly grounded or on a grounded work station to avoid damaging the card and/or the touchpanel. 1.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA CAUTION: To prevent over-heating of the card during operation, make sure that the fan electrical connector has remained attached to the PCB connector of the TPS-XVGA. Installation and Hookup The TPS-XVGA is designed to be installed into a specific expansion slot in the TPS-5000 and TPS-6000 touchpanels. The only tools required for installation are a #1 Phillips screwdriver and a grounding strap (or grounded workstation).
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel 6. Refer to the diagram below. Using a #1 Phillips screwdriver, loosen and remove the eight screws that secure the touchpanel base cover. Installation Diagram 1 of 7 - Remove Touchpanel Base Cover Screws CLEAN PANEL WITH SOFT CLOTH ONLY ELECTRONICS, INC Rockleigh, NJ 07647 U.S.A. READ INSTRUCTION MANUAL BEFORE OPERATING NO USER SERVICABLE PARTS UNDER THIS COVER ELECTRONICS, INC Rockleigh, NJ 07647 U.S.A.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA 9. Refer to the diagram below. Using a #1 Phillips screwdriver, loosen, remove and discard the two screws that secure the RGB port blank plate. From the inside of the touchpanel base, remove the plate and discard. Installation Diagram 3 of 7 - Remove RGB Port Blank Plate CAUTION: During the next step, to prevent tearing or distorting the touchpanel label, tighten the plate mounting screws only to the specification described. 10.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel Installation Diagram 4 of 7 - Install Port Access Plate CAUTION: To minimize possible damage during shipping, the TPSXVGA contains packing material between the fan assembly and the card. The packing material must be removed to prevent over-heating of the card during operation. If not removed, refer to “Preparation” that begins on page 4 for instructions.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA Installation Diagram 5 of 7 - Install TPS-XVGA 12. Refer to the diagram below. Install the four card mounting screws (supplied), tighten to finger-tight then, using a #1 Phillips screwdriver, tighten an additional 1/8-turn. Installation Diagram 6 of 7 - Install TPS-XVGA Mounting Screws 10 • RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA Operations & Installation Guide - DOC.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel 13. Position the touchpanel base cover onto the base. 14. Hold the touchpanel base cover in place and position the touchpanel face-down onto a padded surface to prevent scratching of the screen. 15. Re-install the eight base cover screws to finger-tight then, using a #1 Phillips screwdriver, tighten an additional 1/8-turn. NOTE: The TPS-IMC or optional TPS-IMW serves as an interface for the touchpanel.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA Touchpanel Setup Configuring the Touchpanel To configure the touchpanel for RGB computer video input, consult the latest revision of the TPS-5000 or TPS-6000 Operations Guide (Doc. 5863 or 5864, respectively). The latest version of the Operations Guide can be obtained from the Products page (PRODUCT MANUALS section) or the Downloads page (MANUAL Library) of Crestron’s website (www.crestron.com).
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-XVGA Troubleshooting POSSIBLE CAUSE(S) TROUBLE RGB window of touchpanel has no display. Vertical refresh rate from computer too high. Improper video connection. Incorrect firmware/software. Incorrect VT Pro-e project file loaded.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA Further Inquiries If after reviewing this Operations & Installation Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel Appendix: Optional Touchpanel Setups Optional touchpanel setups that utilize the TPS-XVGA include serial mouse control driver software and instructions to integrate a Boeckeler Pointmaker® Video Marker telestrator with the touchpanel and Cresnet system. Serial Mouse Control Driver The serial mouse control driver software allows the TPS touchpanel to function as a touchscreen monitor.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA Telestrator Video Annotation Device TPS touchpanels equipped with TPS-XVGA expansion cards can be integrated with the Boeckeler Pointmaker® Video Marker (model PVI-83) telestrator, a video annotation device by Boeckeler Instruments (www.pointmaker.com). This device (acquired separately) is used to enhance a video presentation by enabling users to emphasize key points or annotate details of an image.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
RGB Computer Interface Card for TPS/Tilt Panel Crestron TPS-XVGA This page intentionally left blank. 18 • RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA Operations & Installation Guide - DOC.
Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel This page intentionally left blank. Operations & Installation Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide - DOC. 5944 07.01 Specifications subject to change without notice.
