Specifications

Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel
Operations & Installation Guide - DOC. 5944 RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA •• 9
Installation Diagram 4 of 7 - Install Port Access Plate
CAUTION: To minimize possible damage during shipping, the TPS-
XVGA contains packing material between the fan assembly and the card.
The packing material must be removed to prevent over-heating of the
card during operation. If not removed, refer to “Preparation” that begins
on page 4 for instructions.
NOTE: The TPS-XVGA touchpanel interface connector pins are more
easily inserted by gently “rocking” the TPS-XVGA side-to-side while
pressing onto connector.
11. As shown on the next page, insert the computer video connector
of the TPS-XVGA through the RGB port on the rear of the
touchpanel base. Align the pins on the touchpanel interface
connector of the card with the touchpanel motherboard
connector. DO NOT force pins into connector. Press the
TPS-XVGA until pins are fully seated. Make sure that the
screw holes of the card align with the mounting posts on the
motherboard.