Specifications

Crestron TPS-XVGA RGB Computer Interface Card for TPS/Tilt Panel
Operations & Installation Guide - DOC. 5944 RGB Computer Interface Card for TPS/Tilt Panel: TPS-XVGA •• 5
removed to prevent over-heating of the card during operation. The only
tools required for this procedure are a tool to open the packing box and a
grounding strap (or grounded workstation).
CAUTION: The TPS-XVGA contains ESD sensitive devices. Perform
the following procedure while wearing a grounding strap that is properly
grounded or on a grounded work station to avoid damaging the card
and/or the touchpanel.
1. Carefully open the shipping box and remove the ESD
prevention bag that contains the TPS-XVGA.
2. Carefully open the ESD prevention bag and remove the
TPS-XVGA.
CAUTION: To minimize possible damage during shipping, the
TPS-XVGA contains packing material between the fan assembly and the
card. The packing material must be removed to prevent over-heating of
the card during operation.
3. Refer to the diagram below. From the left-side of the card,
carefully remove the packing material from between the fan
assembly and the card.
Remove Packing Material
4. Make sure that any pieces of packing material that may have
torn off during removal are not present in the fan assembly or
on the card.