® Crestron Isys TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Contents Crestron Isys® Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Internal Block Diagram ................................................................................
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels ® Crestron Isys Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Introduction The features and specifications for all three touchpanels are identical, except for those relating to the screen. The touchpanels are available in black or white, designated by the B or W in the model name.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Features and Functions (Continued) • • • • • Backlit “softkey” buttons 128 MB of DDR RAM, 32 MB of internal flash (expandable to 160 MB) Includes a TPMC-CH-IMC to facilitate A/V connections Tiltcase housing with integral rear cover and cable strain relief Available in black with silver accent or white with gray accent Isys® Isys power and beauty are infused throughout Crestron’s entire touchpanel lineup.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels QuickMedia™ The TPS-12B/W, TPS-15B/W & TPS-17B/W are also equipped with a single QuickMedia input port. Through QuickMedia (QM), the TPS-12B/W, TPS-15B/W & TPS-17B/W interface directly with Crestron’s QM-based MediaManager products using a single CAT5e type cable.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Internal Block Diagram The following diagram represents the switching abilities of the TPS-12B/W, TPS-15B/W & TPS-17B/W. The diagram depicts the video, audio and connectivity paths available. Internal Block Diagram of the TPS-12B/W, TPS-15B/W & TPS-17B/W 4 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Specifications Specifications for the TPS-12B/W, TPS-15B/W & TPS-17B/W are listed in the following table. TPS-12B/W, TPS-15B/W & TPS-17B/W Specifications SPECIFICATION DETAILS Touchscreen Display Display Type TFT active matrix color LCD Size TPS-12B/W: 12 inch (30.5 cm) diagonal TPS-15B/W: 15 inch (38.1 cm) diagonal TPS-17B/W: 17 inch (43.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W TPS-12B/W, TPS-15B/W & TPS-17B/W Specifications (Continued) SPECIFICATION DETAILS Video Signal Types Auto-detecting composite, S-video or component Formats NTSC 480i or PAL 576i Color Depth 24-bit, 16.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels TPS-12B/W, TPS-15B/W & TPS-17B/W Specifications (Continued) SPECIFICATION DETAILS Available Models TPS-12B Isys 12” Tilt Touchpanel (Slimline), Black TPS-12W Isys 12” Tilt Touchpanel (Slimline), White TPS-15B Isys 15” Tilt Touchpanel (Slimline), Black TPS-15W Isys 15” Tilt Touchpanel (Slimline), White TPS-17B Isys 17” Tilt Touchpanel (Slimline), Black TPS-17W Isys 17” Tilt Touchpanel (Slimline), White Included Accessories TPMC
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Physical Description This section provides information on the connections, controls and indicators available on your TPS-12B/W, TPS-15B/W & TPS-17B/W. TPS-12B Physical View TPS-15W Physical View TPS-17B Physical View 8 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels TPS-12B/W Overall Dimensions (Front View) 12.85 in (32.64 cm) 10.43 in (26.49 cm) 12 inch 12.15 in (30.86 cm) TPS-12B/W Overall Dimensions (Side View at Maximum and Minimum Elevation) 45° 12.15 in (30.86 cm) 10.70 in (27.18 cm) 12.40 in (31.50 cm) Operations Guide – DOC.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W TPS-15B/W Overall Dimensions (Front View) 14.94 in (37.85 cm) 13.47 in (34.21 cm) 11.94 in (30.33 cm) 15 inch TPS-17B/W Overall Dimensions (Front View) 17.63 in (44.78 cm) 11.94 in (30.33 cm) 17 inch 13.47 in (34.21 cm) NOTE: The TPS-15BW and TPS-17BW are the same height. 10 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels TPS-15B/W & TPS-17B/W Overall Dimensions (Side View at Maximum and Minimum Elevation) 45° 13.47 in (34.21 cm) 11.61 in (29.49 cm) 12.40 in (31.50 cm) NOTE: All three touchpanels share an identical base unit. Bottom View 7.00 in (17.78 cm) 9.60 in (24.38 cm) 8.40 in (21.34 cm) Operations Guide – DOC.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels TPS-12B/W, TPS-15B/W & TPS-17B/W Pushbuttons Reset Button 1 TPS-12B/W, TPS-15B/W & TPS-17B/W Connectors (Cover Removed) 2 3 4 5 6 7 8 9 10 11 C R E ST RON NOTE: All connections to the TPS-12B/W, TPS-15B/W & TPS-17B/W are made through the ports on the rear panel. These ports are not accessible after the cover is replaced.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS RS-232 (Continued) DESCRIPTION PIN # DESCRIPTION 1 CTS 2 GND 3 RXD 4 TXD 5 RTS 6 N/C (Not connected) In the event that modular cables or an RJ-11 to DB9F adapter is not available, the following diagram provides information so that the cable can be fabricated on site. (Alternatively, Crestron cable number STCP-502PC is sold separately.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS 7 HEADPHONES4 (1) 3.5 mm TRS mini phone jack; Output power: 12 mW per channel; Minimum impedance: 32 Ω. 8 MEMORY SLOT (1) Type II Compact Flash card slot for memory expansion (up to 160 MB).
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels 8. The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying audio, video and microphone signals. The QM input port conforms to the 568B wiring standard. Refer to the following table for connector pinouts.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Industry Compliance As of the date of manufacture the TPS-12B/W, TPS-15B/W & TPS-17B/W have been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W QuickMedia Wiring The Crestron QuickMedia cable (sold under the name “CresCAT-QM”) contains one CAT5E cable and one Cresnet cable in Siamese jackets. Installation of any QM device is as simple as installing CresCAT-QM wires from the output of one device to the input of another. Installations are flexible, affordable and fast. For more information, refer to the latest revision of the Crestron MediaManager Applications Guide (Doc. 6244).
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels QM Network Topology Origination Points Endpoints Midpoints QM QM-TX QM QM-MD7x2 QM QM TPS-12/15/17 BW QM-MD7x2 QM QM-FTDC TPS-12/15/17 BW QM QM-WMC Identity Code Net ID The Net ID of the TPS-12B/W, TPS-15B/W & TPS-17B/W has been factory set to 03. The Net IDs of multiple TPS-12B/W, TPS-15B/W & TPS-17B/W devices in the same system must be unique.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Configuring the Touchpanel NOTE: The only connection required to configure the touchpanel is power (supplied via Cresnet). Refer to “Hardware Hookup” on page 35 for details. To configure the unit it may be necessary to access a series of setup screens prior to viewing run-time screens that are loaded into the touchpanel for normal operation.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Calibration Menu CALIBRATION MENU Touch Perform Calibration. The message “Touch Upper Left” appears centered on the panel with a cross hair in the upper left corner. Touch the center of the cross hair in the corner of the screen to initiate calibration. Another message, “Touch Upper Right”, appears with a cross hair in the correct corner. Touch the center of the cross hair in the corner of the screen.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Setup Menu To obtain the SETUP MENU press the Setup button from the MAIN MENU. The SETUP MENU offers a series of buttons which open additional menus and displays and are detailed in subsequent paragraphs. The SETUP MENU also provides Down/Up buttons to control Screen Brightness, Key Backlight and Standby Timeout. The Hardkey Test Results indicators will light when each respective button is pushed on the touchpanel.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels INTERFACE MENU Two buttons adjacent to the hexadecimal display, DOWN and UP, decrease and increase the Net ID by one, respectively. The four buttons at the bottom define how the RS-232 port can be used; as a console port (i.e.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W through Crestron Toolbox. Refer to the TCP/IP Communications section of “Establishing Communication”, which starts on page 47 for additional Ethernet setup details. ETHERNET SETUP MENU ETHERNET STATIC IP SETTINGS 24 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels ETHERNET DNS SETTINGS ETHERNET WINS SETTINGS Selection of the DHCP Enable button from the ETHERNET SETUP MENU displays the DHCP options Renew and Release. Operations Guide – DOC.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W ETHERNET SETUP MENU (DHCP ENABLED) 26 • Tilt Touchpanels: TPS-12B/W, TPS-15B/W & TPS-17B/W Operations Guide – DOC.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels RS-232 Menu The touchpanel allows for one of four RS-232 communication modes: • Console (i.e.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W QM Setup To open the QM SETUP menu, press the QM button from the SETUP MENU. The QM SETUP menu offers controls for selecting Peak and Boost in Video, S-Video and Component modes. After these parameters have been set, select the Return button to return to the SETUP MENU. QM SETUP Refer to the following table for additional QM SETUP MENU details.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels QM Setup Details (Continued) QM SETUP SCREEN CONTROLS DESCRIPTION Peak Peak adjusts for high frequency attenuation that can occur over long cable lengths. Boost Boost compensates for overall signal loss that can occur over long cable lengths. Video Puts the menu in Video mode so that you can adjust the peak and boost signals for video.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Refer to the following table for additional GENERAL AUDIO SETUP menu details. General Audio Setup Details GENERAL AUDIO SETUP SCREEN CONTROL DESCRIPTION Play Test WAV File Plays a short WAV audio file. Restore Default Audio Settings Restores the audio settings to their factory defaults. Mute A separate Mute button is provided for each of the volume controls.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels QM AUDIO INPUT SETUP Refer to the following table for additional QM AUDIO INPUT SETUP menu details. QM Audio Input Setup Details QM AUDIO INPUT SETUP SCREEN CONTROL DESCRIPTION Restore Default Input Settings Returns audio settings to the factory defaults. Mute A separate Mute button is provided for each of the three inputs. Prog Volume Adjusts program audio with the – and + buttons.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Refer to the following graphics and tables for additional information. VIDEO SETUP Video Setup Details VIDEO SETUP SCREEN CONTROL Setup QM Video DESCRIPTION Displays the VIDEO SETUP menu. By default, the VIDEO SETUP menu displays video controls: Brightness, Contrast, Saturation and Hue on the right side of the menu. Video Pressing this before pressing the Setup QM Video button will open the VIDEO SETUP menu in Video mode.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels VIDEO SETUP (Second Screen) Video Setup Details – Video, S-Video and Component VIDEO SETUP SCREEN CONTROL DESCRIPTION Video Selects composite video source at Video In. S-Video Selects S-video at Video In. Component Selects Component video at Video In. Enable Black & White Enables display of black & white input signal. Auto Detect Enabling the auto-detect mode automatically selects video source connected to the Video In input.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Video Setup Details – Video, S-Video and Component (Continued) VIDEO SETUP SCREEN CONTROL Overscan DESCRIPTION These controls adjust the amount of video information at the edges of the image. This part of the video picture is usually beyond the display capabilities of the screen. None Sets the video screen so there is no overscan. The amount of used screen area is smallest in this configuration.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Hardware Hookup Ventilation The TPS-12B/W, TPS-15B/W & TPS-17B/W should be used in a well-ventilated area. The venting holes should not be obstructed under any circumstances. If the TPS-12B/W, TPS-15B/W & TPS-17B/W is hot to the touch, consider using forced air ventilation. To prevent overheating, do not operate this product in an area that exceeds the environmental temperature range listed in the table of specifications.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Access to I/O Panel and Cable Routing Remove four screws to access the I/O Panel Route cables through here The TPS-12B/W, TPS-15B/W & TPS-17B/W touchpanels have rubber pads on the underside of the base so they can rest on a horizontal surface. Make the required connections as shown and described in the following sections. Refer to the illustration on the following page for proper connections; apply power last.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Hardware Connections for the TPS-12B/W, TPS-15B/W & TPS-17B/W USB: RESERVED FOR FUTURE APPLICATIONS GROUND C R E ST RON RS-232: TO COMPUTER OR OTHER RS-232 DEVICE LAN: 10BaseT/100BaseTX HIGH SPEED ETHERNET TO LAN HEADPHONES COMPACT FLASH CARDS NET: TO CONTROL SYSTEM AND OTHER CRESNET DEVICES AUDIO I/O: BALANCED AUDIO IN & MIC OUT OVER CAT5 VIDEO IN: BALANCED VIDEO INPUT OVER CAT5 QM IN: QUICKMEDIA VIDEO, AUDIO & MIC INPUT OVER CAT5 C
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W QM-TX QuickMedia Transmitter The QM-TX QuickMedia Transmitter can be used to connect a video or audio source to a QuickMedia network without a locally available QM transmitter (such as the QM-WMC). The QM-TX accepts composite video, S-video, component video and audio signals. These signals are encoded and converted to the QuickMedia standard and fed over a CAT5E or CAT6 cable to a QM receiver (such as the TPS-12B/W, TPS-15B/W & TPS-17B/W).
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Tilt Touchpanels Configuration Manager Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Configuration Manager is the view where programmers “build” a Crestron control system by selecting hardware from the Device Library. • To incorporate the TPS-12B/W, TPS-15B/W & TPS-17B/W (Cresnet) into the system, drag the TPS-12B/W, TPS-15B/W & TPS-17B/W from the Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in the System Views.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Locating the TPS-12B/W, TPS-15B/W & TPS-17B/W (Ethernet) in the Device Library • The system tree of the control system displays the device in the appropriate slot with a default Net ID or IP ID as shown in the following illustration. NOTE: Observe that there is both an Ethernet device in Slot 8 and a Cresnet device in Slot 9 of the following illustration.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W “TPS-12B/W (Cresnet) Device Settings” Window (Same as window for TPS-15B/W and TPS-17B/W) “TPS-15B/W (Ethernet) Device Settings” Window (Same as window for TPS-12B/W and TPS-17B/W) • Program Manager The ID code specified in the SIMPL Windows program must match the Net ID or IP ID of each unit. Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Programming with VisionTools Pro-e Touchpanel screens should be created in VisionTools Pro-e to allow switching of source signals to desired outputs as well as selection of the system mode. There are no special programming requirements to use the functions of the TPS-12B/W, TPS-15B/W & TPS-17B/W in a room-control system.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W eye is more sensitive to the color green) 6-bits to represent 64 levels of green. These can therefore be combined to provide 65,536 mixed colors (32 x 32 x 64 = 65,536). In a 24-bit graphics display, the video memory allocates 24 bits for each pixel on the screen enabling each pixel to take on any one of a possible 16.7 million colors. Each 24-bit value is composed of 8-bits for red, 8-bits for green and 8-bits for blue.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W VT Pro-e “Page Properties” Window – Bit Depth Selection Tilt Touchpanels VT Pro-e “Image Properties” Window – Bit Depth Selection Hard Button Programming Four of the buttons can be programmed to access any frequently used command. Each button has a permanently fixed digital join number. The sequence of digital join numbers is (left to right) 1 through 4. Refer to the following diagram for their assigned join numbers.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W There are two separate applications with multibyte characters – static text on buttons and indirect text on buttons. No Isys touchpanel firmware changes are required in either case. Indirect text on a button is entered in VT Pro-e and the actual string to be displayed is entered in SIMPL Windows.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs, projects or firmware) can be transferred to the control system (and/or device).
Tilt Touchpanels TCP/IP Communication Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W NOTE: Required for operation with a Crestron control system. Ethernet Communication PC RUNNING CRESTRON TOOLBOX TPS-12B/W, TPS-15B/W or TPS-17B/W ETHERNET • Establish serial communication between TPS-12B/W, TPS-15B/W or TPS-17B/W and PC. • Enter the IP address, IP mask and default router of the TPS-12B/W, TPS-15B/W or TPS-17B/W via the Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable DHCP.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W • Tilt Touchpanels Select Functions | Firmware… to upgrade the TPS-12B/W, TPS-15B/W & TPS-17B/W firmware. Program Checks Actions that can be performed on the TPS-12B/W, TPS-15B/W & TPS-17B/W vary depending on whether it is connected via Cresnet or Ethernet. Cresnet Connections Ethernet Connections For Cresnet connections, display the network device tree (Tools | Network Device Tree) to show all network devices connected to the control system.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-12B/W, TPS-15B/W & TPS-17B/W Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION TPS-12B/W, TPS-15B/W & TPS17B/W does not function. TPS-12B/W, TPS-15B/W & TPS-17B/W is not receiving power. Verify power to unit.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels TPS-12B/W, TPS-15B/W & TPS-17B/W Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION TPS-12B/W, TPS-15B/W & TPS-17B/W does not respond to ping command. IP address not correct (LAN green and amber LEDs are off). Assign correct IP address to TPS-12B/W, TPS-15B/W & TPS-17B/W. IP mask not correct (LAN green and amber LEDs are on). Assign correct IP mask.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W wire gauge and the Cresnet power usage of the run should be used in the following equation to calculate the cable length value on the equation’s left side. Cable Length Equation 40,000 L< RxP Where: L = Length of run (or chain) in feet R = 6 Ohms (Crestron Certified Wire: 18 AWG (0.75 MM 2 )) or 1.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. Future Updates As Crestron improves functions, adds new features and extends the capabilities of the TPS-12B/W, TPS-15B/W & TPS-17B/W, additional information may be made available as manual updates.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Tilt Touchpanels Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Isys® TPS-12B/W, TPS-15B/W & TPS-17B/W Tilt Touchpanels This page is intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6464A (2014556) 11.06 Specifications subject to change without notice.
