Crestron TPS-12L/15L/17L Isys® Wall Mount Touchpanels Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
Crestron TPS-12L/15L/17L Isys® Wall Mount Touchpanels Contents Isys® Wall Mount Touchpanels: TPS-12L/15L/17L 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Internal Block Diagram ...............................................................................................
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L ® Isys Wall Mount Touchpanels: TPS-12L/15L/17L Introduction The Crestron Isys® TPS-12L, TPS-15L and TPS-17L family of wall mount touchpanels offer high brightness and contrast combined with a super wide viewing angle to deliver crisp, detailed images under all conditions. For simplicity within this guide, these touchpanels are referred to as TPS-12L/15L/17L except where noted.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Features and Functions (Continued) • • • • • • High speed Cresnet® communications Five backlit “softkey” buttons (one reset and four programmable buttons) 128 MB of DDR RAM, 32 MB of internal flash (expandable to 160 MB) Includes a TPMC-CH-IMC to facilitate A/V connections Wall, lectern and rack mounting options Available in black with silver accent or white with gray accent Isys® Isys power and beauty are infused throughout Crestron’s entire touchp
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L QuickMedia™ The TPS-12L/15L/17L is also equipped with a single QuickMedia input port. Through QuickMedia (QM), the TPS-12L/15L/17L interfaces directly with Crestron’s QM-based MediaManager products using a single CAT5e type cable.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Internal Block Diagram The following diagram represents the switching abilities of the TPS-12L/15L/17L. The diagram depicts the video, audio and connectivity paths available. Internal Block Diagram of the TPS-12L/15L/17L 4 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Specifications Specifications for the TPS-12L/15L/17L are listed in the following table. TPS-12L/15L/17L Specifications SPECIFICATION DETAILS Touchscreen Display Display Type TFT active matrix color LCD Size TPS-12L: 12 inch (30.5 cm) diagonal TPS-15L: 15 inch (38.1 cm) diagonal TPS-17L: 17 inch (43.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-12L/15L/17L Specifications (Continued) SPECIFICATION DETAILS Video Signal Types Auto-detecting composite, S-video or component Formats NTSC 480i or PAL 576i Color Depth 24-bit, 16.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-12L/15L/17L Specifications (Continued) SPECIFICATION DETAILS Dimensions (Continued) Depth Weight TPS-12L: 3.80 in (9.66 cm) TPS-15L: 3.80 in (9.66 cm) TPS-17L: 3.80 in (9.66 cm) TPS-12L: 8.5 lbs (3.86 kg) TPS-15L: 9.4 lbs (4.26 kg) TPS-17L: 12.7 lbs (5.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L may be required to register to obtain access to certain areas of the site (including the FTP site). Physical Description This section provides information on the connections, controls and indicators available on your TPS-12L/15L/17L. TPS-12L Physical View 8 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Crestron TPS-12L/15L/17L Isys® Wall Mount Touchpanels TPS-15L Physical View TPS-17L Physical View Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-12L Overall Dimensions (Top, Front and Bottom View) TPS-12L (Side View) 10.79 in (27.41 cm) 11.80 in (29.98 cm) 0.61 in (1.55 cm) 2.09 in (5.31 cm) 3.80 in (9.66 cm) 13.61 in (34.57 cm) NAL 12.70 in (32.26 cm) 10 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-12L Overall Dimensions (Rear View) Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-15L Overall Dimensions (Top, Front and Bottom View) TPS-15L (Side View) 12.56 in (31.90 cm) 13.59 in (34.52 cm) 0.61 in (1.55 cm) 2.09 in (5.31 cm) 3.80 in (9.66 cm) 14.17 in (35.99 cm) NAL 13.27 in (33.69 cm) 12 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-15L Overall Dimensions (Rear View) Operations Guide – DOC.
Isys® Wall Mount Touchpanels TPS-17L Overall Dimensions (Top, Front and Bottom View) Crestron TPS-12L/15L/17L TPS-17L (Side View) 12.81 in (32.53 cm) 13.81 in (35.06 cm) 0.61 in (1.55 cm) 2.09 in (5.31 cm) 3.80 in (9.66 cm) 16.98 in (43.11 cm) 16.07 in (40.81 cm) 14 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-17L Overall Dimensions (Rear View) 13.21 in (33.56 cm) 0.71 in (1.80 cm) 4.69 in (11.91 cm) Operations Guide – DOC. 6355A 10.88 in (27.62 cm) 0.30 in (0.76 cm) 15.57 in (39.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-12L/15L/17L Connectors (TPS-15L Shown) 1 2 4 3 5 6 8 7 10 9 11 NOTE: All connections to the TPS-12L/15L/17L are made through the ports on the rear panel. These ports are not accessible after the touchpanel is mounted in a wall or in a lectern.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS RS-232 (Continued) In the event that modular cables or an RJ-11 to DB9F adapter is not available, the following diagram provides information so that the cable can be fabricated on site. (Alternatively, Crestron cable number STCP-502PC is sold separately.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION 8 QM IN4, 5, 6, 7 (1) 8-wire RJ-45 female, QuickMedia input port; Signal types: Auto-detecting component (YPbPr), S-video (Y/C) or composite video with stereo program audio and (2) microphone channels; Video formats: NTSC 480i or PAL 576i; Connects to QM output port of a QM-TX or other QuickMedia device via CresCAT-QM or CresCAT-IM cable; Maximum cable
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L 7. The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying audio, video and microphone signals. The QM input port conforms to the 568B wiring standard. Refer to the following table for connector pinouts.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Industry Compliance As of the date of manufacture the TPS-12L/15L/17L has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L QuickMedia Wiring The Crestron QuickMedia cable (sold under the name “CresCAT-QM”) contains one CAT5E cable and one Cresnet cable in Siamese jackets. Installation of any QM device is as simple as installing CresCAT-QM wires from the output of one device to the input of another. Installations are flexible, affordable and fast. For more information, refer to the latest revision of the Crestron MediaManager Applications Guide (Doc. 6244).
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L QM Network Topology Identity Code Net ID The Net ID of the TPS-12L/15L/17L has been factory set to 03. The Net IDs of multiple TPS-12L/15L/17L devices in the same system must be unique. The Net ID is set using the internal setup menu (refer to “Interface Menu” on page 26). Net ID may also be set from a personal computer (PC) via the Crestron Toolbox™ (refer to “Establishing Communication” on page 51).
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Configuring the Touchpanel NOTE: The only connection required to configure the touchpanel is power (supplied via Cresnet). Refer to “Hardware Hookup” on page 40 for details. To configure the unit it may be necessary to access a series of setup screens prior to viewing run-time screens that are loaded into the touchpanel for normal operation.
Crestron TPS-12L/15L/17L Isys® Wall Mount Touchpanels Calibration Menu CALIBRATION MENU Touch Perform Calibration. The message “Touch Upper Left” appears centered on the panel with a cross hair in the upper left corner. Touch the center of the cross hair in the corner of the screen to initiate calibration. Another message, “Touch Upper Right”, appears with a cross hair in the correct corner. Touch the center of the cross hair in the corner of the screen.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Setup Menu To obtain the SETUP MENU press the Setup button from the MAIN MENU. The SETUP MENU offers a series of buttons which open additional menus and displays and are detailed in subsequent paragraphs. The SETUP MENU also provides Down/Up buttons to control Screen Brightness, Key Backlight and Standby Timeout. The Hardkey Test Results indicators will light when each respective button is pushed on the touchpanel.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L INTERFACE MENU Two buttons adjacent to the hexadecimal display, DOWN and UP, decrease and increase the Net ID by one, respectively. The four buttons at the bottom define how the RS-232 port can be used; as a console port (i.e.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L “Establishing Communication”, which starts on page 51 for additional Ethernet setup details. ETHERNET SETUP MENU ETHERNET STATIC IP SETTINGS 28 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L ETHERNET DNS SETTINGS ETHERNET WINS SETTINGS Selection of the DHCP Enable button from the ETHERNET SETUP MENU displays the DHCP options Renew and Release. Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L ETHERNET SETUP MENU (DHCP ENABLED) 30 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L RS-232 Menu The touchpanel allows for one of four RS-232 communication modes: • Console (i.e.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L QM Setup To open the QM SETUP menu, press the QM button from the SETUP MENU. The QM SETUP menu offers controls for selecting Peak and Boost in Video, S-Video and Component modes. After these parameters have been set, select the Return button to return to the SETUP MENU. QM SETUP Refer to the following table for additional QM SETUP MENU details.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L QM Setup Details (Continued) QM SETUP SCREEN CONTROLS DESCRIPTION Peak Peak adjusts for high frequency attenuation that can occur over long cable lengths. Boost Boost compensates for overall signal loss that can occur over long cable lengths. Video Puts the menu in Video mode so that you can adjust the peak and boost signals for video. S-Video Puts the menu in S-Video mode so that you can adjust the peak and boost signals for S-video.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Refer to the following table for additional GENERAL AUDIO SETUP menu details. General Audio Setup Details GENERAL AUDIO SETUP SCREEN CONTROL DESCRIPTION Play Test WAV File Plays a short WAV audio file. Restore Default Audio Settings Returns audio settings to their factory defaults. Mute A separate Mute button is provided for each of the volume controls.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L QM AUDIO INPUT SETUP Refer to the following table for additional QM AUDIO INPUT SETUP menu details. QM Audio Input Setup Details QM AUDIO INPUT SETUP SCREEN CONTROL DESCRIPTION Restore Default Input Settings Returns audio settings to their factory defaults. Mute A separate Mute button is provided for each of the three inputs. Prog Volume Adjusts program audio with the – and + buttons.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Refer to the following graphics and tables for additional information. VIDEO SETUP Video Setup Details VIDEO SETUP SCREEN CONTROL Setup QM Video DESCRIPTION Displays the VIDEO SETUP menu. By default, the VIDEO SETUP menu displays video controls: Brightness, Contrast, Saturation and Hue on the right side of the menu. Video Pressing this before pressing the Setup QM Video button will open the VIDEO SETUP menu in Video mode.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L VIDEO SETUP (Second Screen) Video Setup Details – Video, S-Video and Component VIDEO SETUP SCREEN CONTROL DESCRIPTION Video Selects composite video source at Video In. S-Video Selects S-video at Video In. Component Selects Component video at Video In. Enable Black & White Enables display of black & white input signal. Auto Detect Enabling the auto-detect mode automatically selects video source connected to the Video In input.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Video Setup Details – Video, S-Video and Component (Continued) VIDEO SETUP SCREEN CONTROL Overscan DESCRIPTION These controls adjust the amount of video information at the edges of the image. This part of the video picture is usually beyond the display capabilities of the screen. None Sets the video screen so there is no overscan. The amount of used screen area is smallest in this configuration. Normal Sets the video screen for normal overscan.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Mounting Options The TPS-12L/15L/17L touchpanel installs simply and cleanly into existing or newly constructed walls with an assortment of pre- and post-construction mounting options. All mounting options are provided separately from the actual touchpanel. Refer to the following table for a complete list of mounting options.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Exploded view of Mounting the TPS-12L in the Optional BB-12L Back Box Touchpanel Removal If it is necessary to remove the touchpanel after it has been installed into a mounting surface, complete the following steps in the order provided to remove the touchpanel. The only tool required is a #2 Phillips tip screwdriver. 1. Lift the bezel off the touchpanel. Do not apply excessive pressure to the touchscreen. 2.
Crestron TPS-12L/15L/17L Connect the Device Isys® Wall Mount Touchpanels Make the necessary connections as called out in the illustration on the following page. Refer to “Network Wiring” on page 21 before attaching the 4-position terminal block connector. Apply power after all connections have been made. CAUTION: Do not apply excessive pressure to the touchscreen display during handling. Doing so can crack the screen and damage the touchpanel.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Hardware Connections for the TPS-12L/15L/17L USB: RESERVED FOR FUTURE APPLICATIONS GROUND LAN RS-232: TO COMPUTER OR OTHER RS-232 DEVICE LAN: 10BaseT/100BaseTX HIGH SPEED ETHERNET TO LAN HEADPHONES AUDIO I/O: BALANCED AUDIO IN & MIC OUT OVER CAT5 VIDEO IN: BALANCED VIDEO INPUT OVER CAT5 COMPACT FLASH CARDS NET: TO CONTROL SYSTEM AND OTHER CRESNET DEVICES QM IN: QUICKMEDIA VIDEO, AUDIO & MIC INPUT OVER CAT5 CAUTION: Only use the TPMC-CH-IMC Int
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Isys® Wall Mount Touchpanels Configuration Manager Crestron TPS-12L/15L/17L Configuration Manager is the view where programmers “build” a Crestron control system by selecting hardware from the Device Library. • To incorporate the TPS-12L/15L/17L (Cresnet) into the system, drag the TPS-12L/15L/17L from the Touchpanels | Touchpanels (Cresnet) folder of the Device Library and drop it in the System Views.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L • The system tree of the control system displays the device in the appropriate slot with a default Net ID or IP ID as shown in the following illustration. NOTE: Observe that there is both an Ethernet device in Slot 8 and a Cresnet device in Slot 9 of the following illustration. It is possible to have both types of device attached to a control system so long as the control system has either a built-in or expansion Ethernet interface.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L “TPS-15L (Ethernet) Device Settings” Window (Same as window for TPS-12L and TPS-17L) • Program Manager The ID code specified in the SIMPL Windows program must match the Net ID or IP ID of each unit. Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L available commercially or as shareware. The TPS-12L/15L/17L touchpanels only accept the following WAV file format: PCM, 8KHz, mono, 8-bit. For more information about how to use Sound Recorder, refer to its User’s Guide and extensive help information provided with the software. Also refer to the help file in VT Pro-e to learn how to use its audio tool, Sound Manager, to attach WAV files to a touchpanel project.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Relationship of Bits to Colors NUMBER OF BITS 1 bit NUMBER OF COLORS Black and White 2 bits 4 Colors 4 bits 16 Colors 8 bits 256 Colors 16 bits 65,536 Colors (Highcolor) 24 bits 16.7 million Colors (Truecolor) 32 bits 16.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Hard Button Programming Four of the buttons can be programmed to access any frequently used command. Each button has a permanently fixed digital join number. The sequence of digital join numbers is (left to right) 1 through 4. Refer to the following diagram for their assigned join numbers. A description for each button signal is described in the SIMPL Windows help file (F1).
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Example Program An example program for the TPS-12L/15L/17L is available from the Crestron website (http://www.crestron.com/exampleprograms). 50 • Isys® Wall Mount Touchpanels: TPS-12L/15L/17L Operations Guide – DOC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs, projects or firmware) can be transferred to the control system (and/or device).
Isys® Wall Mount Touchpanels TCP/IP Communication Crestron TPS-12L/15L/17L NOTE: Required for operation with a Crestron control system. Ethernet Communication PC RUNNING CRESTRON TOOLBOX TPS-12L/15L/17L ETHERNET • Establish serial communication between TPS-12L/15L/17L and PC. • Enter the IP address, IP mask and default router of the TPS-12L/15L/17L via the Crestron Toolbox (Functions | Ethernet Addressing); otherwise enable DHCP. • Confirm Ethernet connections between TPS-12L/15L/17L and PC.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Program Checks Actions that can be performed on the TPS-12L/15L/17L vary depending on whether it is connected via Cresnet or Ethernet. Cresnet Connections Ethernet Connections For Cresnet connections, display the network device tree (Tools | Network Device Tree) to show all network devices connected to the control system. Right-click on the TPS-12L/15L/17L to display actions that can be performed on the TPS-12L/15L/17L.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. TPS-12L/15L/17L Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION TPS-12L/15L/17L does not function. TPS-12L/15L/17L is not receiving power. Verify power to unit. Use only Crestron power supplies for Crestron equipment.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L TPS-12L/15L/17L Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION TPS-12L/15L/17L does not respond to ping command. IP address not correct (LAN green and amber LEDs are off). Assign correct IP address to TPS-12L/15L/17L. IP mask not correct (LAN green and amber LEDs are on). Assign correct IP mask. The PC and the TPS-12L/15L/17L are not on same subnet. Ensure that the PC and the TPS-12L/15L/17L are on the same subnet.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Cable Length Equation 40,000 L< RxP Where: L = Length of run (or chain) in feet R = 6 Ohms (Crestron Certified Wire: 18 AWG (0.75 MM 2 )) or 1.6 Ohms (Cresnet HP: 12 AWG (4 MM 2 )) P = Cresnet power usage of entire run (or chain) Make sure the cable length value is less than the value calculated on the right side of the equation.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L List of Related Reference Documents (Continued) DOCUMENT TITLE TMK-15L & WMKT-15L Trim Ring Mount Kits TMK-17L & WMKT-17L Trim Ring Mount Kits TPMC-CH-IMC Interface Module Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876].
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and as applicable, associated media, printed materials and “online” or electronic documentation (the “Software”).
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Isys® Wall Mount Touchpanels Crestron TPS-12L/15L/17L Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron TPS-12L/15L/17L Isys® Wall Mount Touchpanels This page is intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6355A (2013094) 11.06 Specifications subject to change without notice.
