Specifications

G-Series Touchpanel Interface Crestron Isys
®
TPS-G-TPI
QM Audio Input Setup Menu
To open the QM AUDIO INPUT SETUP MENU, press the QM Inputs button on
the GENERAL AUDIO SETUP MENU. The QM AUDIO INPUT SETUP MENU
offers a series of buttons that adjust the volume as indicated by the sliding bars.
These controls allow you to precisely control QM Prog (program) and Mic (1 and 2)
Volume.
The QM Audio 1 and QM Audio 2 buttons select the source of QM input, while the
Restore Default Input Settings button returns all audio parameters on this menu to
their default settings. Mute buttons are provided to turn off program or mic input
from the selected source. After these parameters have been set, select the Return
button to return to the SETUP MENU.
QM AUDIO INPUT SETUP MENU
Refer to the following table for additional QM AUDIO INPUT SETUP MENU
details.
QM Audio Input Setup Details
QM AUDIO
INPUT SETUP
MENU
CONTROLS
DESCRIPTION
QM Audio 1 Selects the source of the QM data. QM Program and Mic on QM
Input 1 can be adjusted and the Prog and Mic controls display
QM 1.
QM Audio 2 Selects the source of the QM data. QM Program and Mic input
on QM Input 2 can be adjusted and the Prog and Mic controls
display QM 2.
Restore Default Input
Settings
Returns the settings on this menu to their factory defaults.
QM Prog Volume Depending on the selected QM source, this controls the volume
of incoming QM program information.
QM Mic 1 Volume Depending on the selected QM source, this controls the volume
of an upstream mic entering the TPS-G-TPI Interface.
QM Mic 2 Volume Depending on the selected QM source, this controls the volume
of an upstream mic entering the TPS-G-TPI Interface.
¥ Isys
®
G-Series Touchpanel Interface: TPS-G-TPI Operations Guide – DOC. 6445
24