Installation guide

Crestron TPS-MEM64MB & TPS-MEM128MB Flash Memory
Remove Expansion Cover Plate
4b. If a TPS-VIDL-1 or TPS-VIDL-2 video expansion card
is present, refer to the following diagram. Completely
loosen the knurled mounting screws and carefully
remove the expansion card from the device’s
motherboard connector without bending any of the pins
on the device’s interface connector.
TPS-VIDL-1/TPS-VIDL-2 Removal
Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 13