Installation guide

Flash Memory Crestron TPS-MEM64MB & TPS-MEM128MB
5. As shown in the following diagram, locate the jumper for
selecting memory module voltage. If the jumper is not present
on the device’s motherboard, the TPS-MEM64MB and TPS-
MEM128MB cannot
be installed. If the jumper is present,
continue to the next step.
Jumper Location
CRESTRON
ROCKLEIGH, NJ 07647 USA
FOR TPS-MEM-64MB AND TPS-MEM128MB, MOVE
JUMPER TO 3.3V POSITION
LOCATION OF JUMPER FOR SELECTING VOLTAGE
ELECTRONICS INC.
AUDIO INPUT MIC OUT
R+ S R- L+ L-
S
+ - S
24 Y Z G
NET
RS-232
6. Move the jumper to the 3.3V position by placing the jumper
over the center pin and the pin labeled 3.3V as shown in the
following diagram.
14 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Installation Guide - DOC. 6261