User Guide

Crestron Isys™ TPS-TPI Touchpanel Interface
Reserved Join Numbers
A reserved join number is a feature of the software that enables a designer to create a
button on a VT Pro-e page that either calls up the Setup Menu, adjusts standby
timeout, etc. These numbers also allow the control system to trigger touch-sensitive
screen overlay functions (i.e., recall RGB preset when source changes). The tables
shown below and on the next two pages provide lists of digital and analog reserved
join numbers available within the software.
XGA and Video Digital Reserved Join Numbers for TPS-TPI Touchpanel Interface
JOIN NUMBER FUNCTION
V
ALUE
17016* Preset Refer to * below
17101 Video Composite 1
17102 Video S-Video 1
17103 Video Auto Detect 1
17104 Video Composite 2
17105 Video S-Video 2
17106 Video Auto Detect 2
17111 Video Brightness Increase
17112 Video Brightness Decrease
17113 Video Contrast Increase
17114 Video Contrast Decrease
17115 Video Saturation Increase
17116 Video Saturation Decrease
17117 Video Hue Increase
17118 Video Hue Decrease
* Join numbers 17016 through 17031 corresponds to Preset 1 through Preset 16, sequentially.
System Digital Reserved Join Numbers for TPS-TPI Touchpanel Interface
JOIN NUMBER FUNCTION
V
ALUE
17210 Cresnet Mode On
17211 Cresnet Mode Off
17214 Cresnet ID Down
17215 Cresnet ID Up
17231 Standby Timeout Up
17232 Standby Timeout Down
17237 Panel Tracking Enabled
17238 Panel Tracking Disabled
17242 Call up Setup Menu Not Applicable
Operations Guide - DOC. 5855 Touchpanel Interface: Crestron Isys™ TPS-TPI • 21