User Guide

Crestron
TPS-XTXRF
Two-Way RF Transceiver Module
Installation Diagram 4 of 12 - Remove Mounting Screws & Fan Assembly
NOTE: If the TPS touchpanel is equipped with an optional TPS-XVGA or
TPS-XVGA-BV expansion card, temporarily removing the card makes installation
of the TPS-XTXRF cable connectors easier. However, re-installation of the card
requires a #1 Phillips screwdriver (1.5” length).
11. Refer to the diagram below. Position the TPS-XTXRF onto the
touchpanel as shown.
Installation Diagram 5 of 12 - Position TPS-XTXRF onto Touchpanel
Operations & Installation Guide - DOC. 5844 Two-Way RF Transceiver Module: TPS-XTXRF • 9