User Guide

Two-Way RF Transceiver Module Crestron
TPS-XTXRF
Installation Diagram 10 of 12 - Lower TPS-XTXRF onto Touchpanel Base
16. Hold the TPS-XTXRF in place and position the touchpanel face-down
onto a padded surface to prevent scratching of the screen.
17. Refer to the diagram below. Re-install the eight base cover screws to
finger-tight then, using a #1 Phillips screwdriver, tighten an additional
1/8-turn.
Installation Diagram 11 of 12 - Install TPS-XTXRF Mounting Screws
TPS-6000
ZA*****
SEE MANUAL
FCC ID: EROTPS-6000
C000000
USE POWER PACK PW-2420RU
ELECTRONICS, INC
Rockleigh, NJ 07647
U.S.A.
ELECTRONICS, INC
Rockleigh, NJ 07647
U.S.A.
CLEAN PANEL WITH SOFT CLOTH ONLY
READ INSTRUCTION MANUAL BEFORE OPERATING
NO USER SERVICABLE PARTS UNDER THIS COVER
18. Place the touchpanel upright on the work surface.
12 • Two-Way RF Transceiver Module: TPS-XTXRF Operations & Installation Guide - DOC. 5844